TOA Corporation WM-D5300 Manuale Utente

Pagina di 24
8
6. PreParing Batteries
The WM-D5300 can operate on both the optional rechargeable battery or replaceable dry batteries. 
Please carefully read the corresponding sections for correct use. 
6.1. Battery insertion
 step 1. Turn off the power switch.
 step 2. Hold the transmitter body and slide the battery cover to the right
to remove it.
 step 3. Insert an AA battery according to (+) and (–) indications on the
battery compartment.
For the rechargeable battery, use the optional TOA WB-2000-2 
(package of 2).
For dry batteries, use either the supplied battery or commercial 
AA alkaline batteries (LR6).
 step 4. Replace the battery cover.
6.2. guide to Battery Operating times
6.2.1. remaining operating time
The color of the battery checker changes from green to orange 
as battery consumption progresses, and to red if the battery 
is further continuously used. When the battery checker turns 
red, charge the battery if the dedicated rechargeable battery 
is used. In the case of dry batteries, replace it with a new one. 
guide to the remaining operating time based on the battery 
charge indicator status]
Battery checker status Remaining operating time
Lights green
2 – 8 hours
Lights orange
Less than 2 hours
Lights red
Battery requires charge or replacement.
6.2.2. Continuous operating time
Guide to continuous operating times:  Approx. 8 hours (for fully-charged dedicated rechargeable 
battery or alkaline battery)
note
Operating times may vary depending on usage conditions, such as ambient temperature. 
OFF
ON
Green     Orange     Red
2
H
L
H
L
3