Sennheiser Electronic Corp H1FPXD Manuale Utente

25

No operation indication

Battery is flat

Replace the battery

No mains connection (receiver)

Check the connections of the mains 
unit

No RF signal

Transmitter and receiver are not on 
the same channel

Set transmitter and receiver to 
the same channel

Transmitter is out of range

Reduce the distance between 
transmitter and receiver

RF signal available, 
no audio signal

Receiver’s squelch threshold is 
adjusted too high

See “Adjusting the squelch 
threshold” on page  24

Audio signal has a high 
level of background 
noise or is distorted

Transmitter sensitivity is adjusted 
too low or too high

See “Connecting the microphone/
instrument cable” on page  21

the SK 2 transmitter is not set 
correctly

Receiver’s audio output level is 
adjusted too low or too high

See “Connecting the amplifier/
mixing console” on page  19

Wind- and popshield for SKM 3

Microphone clamp for SKM 3

Clip-on microphone for SK 2, pre-polarized condenser microphone, 
omni-directional

Headmic for SK 2, pre-polarized condenser microphone, super-cardioid

Clip-on microphone for SK 2, pre-polarized condenser microphone, 
cardioid

Guitar cable

with EU mains unit

freePort fp 12-C-EU

freePort fp 72-C-EU

freePort fp 35-C-EU

with US mains unit

freePort fp 12-C-US

freePort fp 72-C-US

freePort fp 35-C-US

863 - 865 MHz:

with EU mains unit

freePort fp 12-E-EU

freePort fp 72-E-EU

freePort fp 35-E-EU

with UK mains unit

freePort fp 12-E-UK

freePort fp 72-E-UK

freePort fp 35-E-UK

freeport.book  Seite 25  Mittwoch, 18. Mai 2005  8:35 08

The 

MIC

/

INST

 slide switch on