Sennheiser Electronic Corp SK5212A2 Manuale Utente
Using operating menu
16
Working with the operating menu
The operating menu has three modes:
•
Display mode:
In display mode, you can display the current menu settings one after the other – even when
the lock mode is activated.
In display mode, you can display the current menu settings one after the other – even when
the lock mode is activated.
•
Selection mode:
In selection mode, you can select the menu whose setting you want to change. To change to
the selection mode, the lock mode must be deactivated.
In selection mode, you can select the menu whose setting you want to change. To change to
the selection mode, the lock mode must be deactivated.
•
Setting mode:
In setting mode, you can change the setting of the selected menu.
In setting mode, you can change the setting of the selected menu.
By way of example of the “
LOWCUT
” menu, this section describes how to use the operating
menu.
Selection Mode
Setting Mode
Display Mode
SET
FLAT
Hz
120
Hz
STORED
MHz
TUNE
SET
SET
SET
LOWCUT
Adjusting
the low-cut
frequency
the low-cut
frequency
Current low-cut
frequency
frequency
MHz
FLAT,
120 Hz
SET
/
ON
M
Hz
SET
Current low-cut
frequency
frequency
M
Hz
SK 5212-II_535300_0909_Sp7.book Seite 16 Dienstag, 22. September 2009 4:07 16