Sennheiser Electronic Corp SKM2000 Manuale Utente
12
Using the radio microphone
Using the radio microphone
To establish a transmission link, proceed as follows:
1. Switch the receiver on (see the instruction manual of the receiver).
2. Switch the radio microphone on (see below).
The transmission link is established and the display backlighting of the
receiver changes from red to orange.
receiver changes from red to orange.
Switching the radio microphone on/off
To switch the radio microphone
on
(online operation):
To switch the radio microphone
off
:
If necessary, deactivate the lock mode (see page 13).
To switch the radio microphone
on
and to
deactivate the RF signal on
switch-on
(offline operation):
Briefly press the
ON
/
OFF
button
쐉
.
The radio microphone transmits an RF signal. The standard
display “
display “
Frequency/Name
” appears on the display panel. The
red
ON
LED
쐎
lights up and the transmission icon
햵
is
displayed.
Keep the
ON
/
OFF
button
쐉
pressed until “
OFF
” appears on
the display panel. The red
ON
LED
쐎
goes off and the display
panel turns off.
When in the operating menu, pressing the
ON
/
OFF
button
쐉
will
cancel your entry (ESC function) and return you to the current
standard display.
standard display.
Keep the
ON
/
OFF
button
쐉
pressed until “
RF Mute On?
”
appears on the display panel.
쐉
쐎
ON/OFF
ON/OFF
ON/OFF
SKM2000_529674_0409_Sp8.book Seite 12 Dienstag, 3. März 2009 11:52 11