Sennheiser Electronic Corp SKM52 Manuale Utente
9
Inserting batteries into the B 5000 battery box
To ensure the longest operating time possible, only use alkaline
manganese batteries for the B 5000 battery box.
manganese batteries for the B 5000 battery box.
LC display shown on the example of the B 5000-1 battery box
Recharging the BA 5000 accupack
Before using the BA 5000 accupack for the first time or if you have
not used it for several weeks, you must charge the accupack
completely.
not used it for several weeks, you must charge the accupack
completely.
The L 50 charger can charge two BA 5000 accupacks
simultaneously.
simultaneously.
To open the battery box, push down
the display section of the battery
box
the display section of the battery
box
.
Insert the batteries. Observe correct
polarity when inserting the
batteries.
polarity when inserting the
batteries.
Close the battery box.
y
3-step LC display for remaining
battery capacity.
battery capacity.
y
If the battery capacity is too low
(LOW BAT), the last segment starts
flashing and the batteries must be
changed.
(LOW BAT), the last segment starts
flashing and the batteries must be
changed.
Place the appropriate charging
adapter
adapter
into the charging
compartment
of the charger.
Insert the BA 5000 accupack into
the charging adapter
the charging adapter
.
Charging time: approx. 2.5 hrs with
the L 50 charger (dependent on the
residual charge of the accupack).
the L 50 charger (dependent on the
residual charge of the accupack).