Fukuda Denshi Co Ltd LX5630 Manuale Utente
6
8. Holes for Security Strap
The accompanied security strap is attached here to prevent the
transmitter from dropping. Adjust the length of the strap to the
appropriate length for the patient.
transmitter from dropping. Adjust the length of the strap to the
appropriate length for the patient.
9. Battery Cap Lock Plate
Locks the battery cap. To release the lock, open the lock plate
outward while pressing the top of the battery cap.
outward while pressing the top of the battery cap.
10. Battery Cap
This is the battery compartment cap. To close the battery
compartment, insert the protrusion part of the battery cap into the
rectangular hole on the transmitter, then push in the batteries with the
battery cap and lock the battery lock plate.
compartment, insert the protrusion part of the battery cap into the
rectangular hole on the transmitter, then push in the batteries with the
battery cap and lock the battery lock plate.
11. Power Supply Switch
This is the switch to turn ON or OFF the power supply. When the
power is turned ON, the SpO
power is turned ON, the SpO
2
measurement mode is in continuous
mode. When the remaining battery becomes low, the "
" mark
flashes in the LCD display and the alarm beeps. As the remaining
battery gets lower, nothing will be displayed on the LCD display.
battery gets lower, nothing will be displayed on the LCD display.
12. Channel Number Label
The transmitter channel number is printed on this label. At the
receiver side, select the same channel number.
receiver side, select the same channel number.