Alpine Electronics of America Inc TMX-R1000 Manuale Utente

 

Front Key Control 
Press this button to turn ON the unit. 
Press and Hold of this button to turn Off the unit. 
While the power is ON then press Power Button, the Mute function is ON. The press 
again, the Mute function is OFF. 
 
Remote Control 
Press POWER button to turn ON and OFF the unit. 
Press MUTE button to mute ON and OFF. 

 
 
 

 

Press SEL Key Button, it shows the Source Select OSD. Press this button to cycle 
through the display modes as AUX1, AUX2, AUX3 and AUX1. 

 

Press and Hold SEL Key Button, it shows the SETUP Menu. Press this button to 
cycle through the display modes as PICTURE, DISP MODE, SYSTEM and 
PICTURE. To change the each mode, it uses 4 directional keys and ENT key. 
 

o 

PICTURE: using Up and Down directional keys to select BRIGHT, COLOR, 
TINT, CONTRAST, SHAPNESS and RESET. Using Left and Right 
directional keys can be changed each pictures value setting.                
RESET: Press ENT key, it changes to Factory Default Picture Setting. 

 
o 

DISP MODE: using Up and Down directional keys to select WIDE, ZOOM, 
CINEMA and NORMAL 

 
o 

SYSTEM: using Up and Down directional keys to select IR TRANS, FM 
TRANS, FM FREQ, SOURCE NAME 1, SOURCE NAME 2, SOURCE 
NAME 3, AUDIO LEVEL 1, AUDIO LEVEL 2, AUDIO LEVEL 3 and 
FACTORY DEFAULT.                                                                               

 

 IR TRANS: using Left and Right directional keys to select A/B/OFF. 

(Default: A) 

 

 FM TRANS: using Left and Right directional keys to select FM Radio 

region (OFF/USA/JPN). (Default: OFF) 

 FM FREQ: using Left and Right directional keys to select desired FM 

Radio Frequencies between 88.1 MHz. to 92.5MHz. USA frequency step 
is 0.2MHz and Japan is 0.1MHz. (Default: 89.1 MHz) 

 

Revision 3 

 

Date 3/16/05