Wyse Technology WT3320 Manuale Utente
80
Terminal Management
Using the Network Properties Sheet
To invoke this properties sheet:
1. Press F2 to invoke the Terminal Properties dialog box.
2. Click on the Network tab.
The following table discusses the functions of the Network properties sheet.
Table 15-1 Network Properties Sheet
Function
Description
Obtain an Address from a
DHCP Server
DHCP Server
Click on this radio button to enable DHCP addressing. An IP
address will be automatically assigned to your terminal by the
DHCP server.
address will be automatically assigned to your terminal by the
DHCP server.
Specify an IP Address
Use this group box to enter a specific IP address.
IP Address
Enter a static IP address in this field.
Enter a static IP address in this field.
Subnet Mask
Enter the subnet mask of the IP address.
Enter the subnet mask of the IP address.
Gateway
Enter the gateway of the IP address.
Enter the gateway of the IP address.
Advanced Network
Note
This command button is activated when Specify an IP
Address is enabled.
This command button is activated when Specify an IP
Address is enabled.
Click on this command button to invoke the Advanced
Network Settings dialog box:
Network Settings dialog box:
Enable DNS
Use this group box to set domain, primary, and secondary
IP addresses for DNS.
Use this group box to set domain, primary, and secondary
IP addresses for DNS.
Enable WINS
Use this group box to set the primary and secondary IP
addresses of a WINS server.
Use this group box to set the primary and secondary IP
addresses of a WINS server.