Wyse Technology WT3320 Manuale Utente

Terminal Firmware Upgrades

You have now enabled the automatic DHCP function. 
You will also need to configure your DHCP option IDs. 
Make sure your DHCP options match the options on 
the DHCP server.

6. Click on the Change DHCP Option... command button.

7. Use the Change Option IDs dialog box to change options, then click on OK to 

save.

Pay special attention to these FTP Option IDs 
functions: File Server (the location of the server where 
the firmware resides), and File Root Path (the location 
of the firmware).

8. Click on the Upgrade tab.

9. Click on the Use FTP Information From DHCP Server radio button on the 

Upgrade properties sheet.

You will need the image and the params.ini files on the 
FTP server to do the upgrade.

10.Shut down the terminal. See “Shutting Down the Terminal” for more information.

Your terminal will automatically upgrade itself when it is powered-up again.

1. Follow instruction 1 through 3 and 5 through 8 in “Automatic Firmware 

Upgrades.”

2. Click on the Upgrade... command button on the Upgrade properties sheet.

This will initiate the firmware upgrade. Once the upgrade is complete, the terminal 
will reboot to the Setup Wizard.