Wyse Technology WT3320 Manuale Utente
58
Installation Procedures
Figure 9-4 Inserting the Plug
Configuration
The modem card can be configured for standard serial communications, or for
network access through a server that can communicate with the modem using PPP
protocol. The following section provides instructions for configuring selections
needed to operate the modem in the desired mode. Refer to “Terminal
Management” and “Connection Configuration” for instructions about how to
configure modems.
network access through a server that can communicate with the modem using PPP
protocol. The following section provides instructions for configuring selections
needed to operate the modem in the desired mode. Refer to “Terminal
Management” and “Connection Configuration” for instructions about how to
configure modems.
Modem Initialization Strings
The initialization string used with the modem option card provided by the
manufacturer is:
manufacturer is:
AT&F&C1&D2
Refer to modem command sets or the initialization files for other strings.
When card is not
installed, snap plug into
hole in option card cover
Plug