Primatronix Ltd EMG900R Manuale Utente

26 

 

 

1.  Pick up the handset or press SPEAKER button (the speaker LED will light) and wait 

for a dial tone.    The line engage led will turn on. 

2. Press the keypad for the telephone number you wish to dial. The display will show 

the number that you dialed on the keypad. If you dial a number over 14 digits long, it 
will show the last 14 digits only. 

3.  When you have completed your call, hang up the handset or press SPEAKER 

button again to disconnect the telephone call. 

 
The line engage red led will turn off when the line is not engaged.    In case the handset 
is not placed well on the telephone, the red led will remain on to warn the user. 
 
It is possible to switch from a handset conversation to a speakerphone conversation by 
pressing the SPEAKER button and picking up or hanging up the handset accordingly. 
 

1.    Dial on the keypad the telephone number. The telephone will voice the digits dialed 

(with voice option YES). To correct a number press the DEL button for each incorrect 
digit 

 
2.    Pick up the handset or press SPEAKER button 
 

When you receive a call, the telephone rings, the Ringer LED flashes, and the display 
shows the CALL# and the caller telephone number (with caller id service activated), and 
say the name of the caller if the number matches with a name recorded in the phone 
book, if not, it will say the numbers of the calling party (with voice option ON) 
 
The Caller ID feature allows you to decide to pick up the phone or not depending on 
who is calling. 
 
If you want to talk to the caller: 
1.  Pick up the handset or press SPEAKER button to answer the call. 
2.  At the end of the call, return the handset to the cradle or press SPEAKER button 
 again.