Primatronix Ltd EMG900R Manuale Utente

34 

1. With the desired telephone number showing on the display, press 

 button. The 

telephone dials out the displayed telephone number automatically in speakerphone 
mode. 

2. The display shows dialed out telephone number and counting timer. 
OR 
1.  Pick up the handset or press SPEAKER button (the speaker LED will light) and wait 

for a dial tone. 

2.    Press and release PHONE BOOK button, 

  icon is shown. 

3.  Review the stored phone number by pressing ▲ or ▼. 
4.  Press 

 button 

 

When an incoming call is received, the unit will display and announce the caller's phone 
number. If the caller's phone number is stored in the phone book, and caller's name will 
be displayed as well. 
If the voice prompt is recorded for this phone number, the unit will announce the voice 
prompt recorded instead of the caller's phone number. 
1. To record names press and release the MENU button until the "NAME 

 is shown.   

2. Press the 

  button. A list of the phone book entries will be display. 

3. Press ▲ or ▼ to select the list you like to record a voice or name for it. 
4. To record or edit the voice prompt, hold down 

 button. Speak clearly into the 

microphone after a beep and “VOICE” icon is flashing. Release the button when you 
finished or the unit will stop recording after 3 seconds. The new voice prompt will 
then be played automatically. 

  To delete the voice prompt recorded, press DEL button during the voice prompt is 

playing.  

5.  Repeat step 3 to 4 to edit or delete more entries or exit the set-up mode by pressing 

the PHONE BOOK button. 

 

1.  Press and release PHONE BOOK button, 

 icon is shown. 

2.  Select the required location from the phone book by pressing ▲ or ▼.  
3.  Press and hold MENU button for two seconds. The display will show EDIT?. 
4. Press 

    button, the first digit of the selected phone number will flash.