Kenwood USA Corporation 32933210 Manuale Utente

6

Press the   switch to switch the transceiver ON.

Press and hold the   switch for approximately 1 second to switch the
transceiver OFF.

Press the 

▲

 key to increase the volume and the 

▼

 key to decrease the volume.

Select your desired channel by pressing a key from 1 to 4.

Note:  Before transmitting, first monitor the channel to make sure it is not already in use.

1 Select your desired channel by pressing a channel key (1 ~ 4).

• If the channel is busy, wait until it becomes free.

2 Press the microphone PTT switch and speak into the microphone.  Release

the PTT switch when you have finished speaking.

• For best sound quality at the receiving station, hold the microphone approximately

1.5 inches (3 ~ 4 cm) from your mouth.

1 Select your desired channel by pressing a channel key (1 ~ 4).

2 When you hear a signal, readjust the volume level if necessary.

3 Respond to the call as described in step 2 of “T

RANSMITTING

”, above.