Kenwood USA Corporation 33293110 Manuale Utente

Using the VOX feature, you can operate the transceiver
hands-free.  In order to use this feature, however, you must
use an external microphone; VOX will not function with the
built-in mircrophone.  For best operation conditions, we
recommend you use an optional headset with both an ear
piece and a microphone on a boom that rests in front of your
mouth.

Wih VOX activated, your voice level will determine when the
transceiver transmits.  Because of this, you must take care
that the ambient noise around you is not so loud that it causes
the transceiver to transmit.  Due to the automatic switching
between transmission and reception, we recommend you set
the VOX gain such that it will not activate transmission when
in an area with excessive ambient noise.

To operate using VOX:

Set up a VOX gain level from 1 to 3 (page 15).

To transmit, simply speak into the microphone.

•

You do not need to press the PTT switch; the transceiver
automatically detects your voice and begins transmitting.

To stop transmitting, stop speaking.

•

Transmission will continue momentarily after you stop
speaking.  You can select the delay time as described on
page 15.

To exit VOX mode, set the VOX gain level to “GL-OF”
(OFF).