Uniden America Corporation UA1601 Manuale Utente
UNIDEN
LONG RANGE RADAR/LASER DETECTOR
BASIC USER’S MANUALEagle
Eye
Latch
Slot
MUTE/DIM
CITY
Signal
Strength
KEY
PRESS TO...
PRESS AND HOLD TO...
MUTE/DIM
MUTE
• MUTE on
• MUTE off
• MUTE off
DIM
• Bright
• Dim
• Dark
• Dim
• Dark
CITY
Switch between City and
Highway modes.
Highway modes.
NA
POWER
Turn
DFR6 on and off.
NA
VOL +
• Turn volume up (6
levels).
• In Menus, go to next
item.
NA
VOL –
• Turn volume down (6
levels).
• In Menus, go to previous
item.
NA
MENU
Access the Menu system.
Exit the Menu system.
MENU SYSTEM
Press MENU to access the Menu system. The screen displays the selection’s
current status. Use the following keys to navigate the menus:
current status. Use the following keys to navigate the menus:
x
MENU: Change a setting (press and hold to exit the Menu system).
x
VOL + : Go to the next Menu item.
x
VOL – : Go to the previous Menu item.
The most common menu items used for initial setup are:
x
Voice (ON/OFF)
x
X Band (ON/OFF)
x
K Band (ON/OFF)
x
Ka Band (ON/OFF)
x
Laser (ON/OFF)
x
POP Mode (ON/OFF)
x
Display Voltage (ON/OFF)
x
Auto Mute (ON/OFF)
x
Backlight (ON/OFF)
This is not a complete list of menu items. Refer to the
DFR6 Detailed Owner’s Manual
on www.uniden.com for a complete list of menu items and how to use them.
NON-KEY ELEMENTS
ELEMENT
WHAT IT DOES
Eagle Eye
Provides a 360
° monitoring radius.
Latch Slot
Insert the bracket latch into this slot.
Mini USB
Provides PC connection for data updates.
Audio Jack
Plug in headset.
Eject
Press to release the bracket latch.
Power Jack
Plug in the 12V Power Cord here.
Signal Strength
Displays how strong the signal received is (5 levels)
BASIC OPERATIONS
This section details
DFR6 basic operations. Refer to the online Detailed User’s
Manual at www.uniden.com for more complete details on all operations and
Menu
Menu
options.
TURN ON
Press POWER. The unit turns on and runs through an initial self-check. It
displays the different bands and their settings.
displays the different bands and their settings.
The
DFR6 turns on automatically when you start the car.
ADJUST VOLUME
Press VOL + to increase volume. The unit beeps, announces “Volume (0 - 6),”
and displays a number increase.
and displays a number increase.
Press VOL – to decrease volume. The unit beeps, announces “Volume (0 - 6),”
and displays a number decrease.
and displays a number decrease.
MUTE VOLUME DURING ALERT
You can mute the alert volume during an alert. This is especially useful in
situations where the alert may be prolonged, such as at red lights.
situations where the alert may be prolonged, such as at red lights.
Press MUTE/DIM during an audio alarm to mute it.
CHANGE THE BRIGHTNESS LEVEL
Adjusting the brightness level applies to the OLED, keys, and strength LEDs at
the same time. The backlight has three settings: BRIGHT, DIM, and DARK.
the same time. The backlight has three settings: BRIGHT, DIM, and DARK.
Press and hold MUTE/DIM. The detector announces the brightnes level as it
changes to that level. Press and hold the keys again to move to the next level.
changes to that level. Press and hold the keys again to move to the next level.
TURN BANDS ON/OFF
The
DFR6 monitors X (HIGHWAY only), K, and Ka bands as well as Laser
transmissions.
CHANGE HIGHWAY TO CITY AND BACK
Press CITY to cycle between City and Highway modes.