Uniden America Corporation UA1602 Manuale Utente

Pagina di 2
UNIDEN 
LONG RANGE RADAR/LASER DETECTOR 
BASIC USER’S MANUAL 
MUTE on
• MUTE off
MUTE MEMORY
• Add
• Delete
DIM 
• Bright
• Dim
• Dark
MARK
User Point *
• Add
• Delete
Error message displays/
sounds if memory full or 
GPS error.
Delete all User Points.
POWER
Turn 
DFR7 on and off.
NA
VOL +
• Turn volume up (6 
levels).
• In Menus, go to next 
item.
Press and hold both 
VOL + 
and VOL –  to change modes 
between HIGHWAY and CITY.
VOL –
• Turn volume down (6 
levels).
• In Menus, go to previous 
item.
MENU
Access the Menu system.
Exit the Menu system. 
* User Points are manually tagged GPS locations where radar detection is 
normally located. For more information, refer to the online Detailed User 
Manual at www.uniden.com.
MENU SYSTEM
Press MENU to access the Menu system. The screen displays the selection’s 
current status. Use the following keys to navigate the menus:
 
x
MENU: Change a setting (press and hold to exit the 
Menu
 system).
 
x
VOL + : Go to the next 
Menu
 item.
 
x
VOL – : Go to the previous 
Menu
 item.
Menu items commonly used for initial setup are:
 
x
Voice (ON/OFF)
 
x
X Band (ON/OFF)
 
x
K Band (ON/OFF)
 
x
Ka Band (ON/OFF)
 
x
POP Filter (ON/OFF)
 
x
Scan Display (ON/OFF).  
 
x
Display (Tap MENU to cycle through Speed/Compass/Voltage/Altitude)  
 
x
Speed Unit (mph or KM/h)
 
x
Auto Mute (ON/OFF)
 
x
Backlight (ON/OFF)
Refer to the online Detailed User’s Manual at www.uniden.com for specifics on 
all Menu options.
NON-KEY ELEMENTS
ELEMENT
WHAT IT DOES
Eagle Eye
Provides a 360
° monitoring radius.
USB
Provides PC connection for data updates.
Audio Jack
Plug in headset.
Eject
Press to release the bracket latch.
Power Jack
Plug the 12V Power Cord here.
BASIC OPERATIONS
This section details 
DFR7 basic operations.  Refer to the online Detailed User’s 
Manual at www.uniden.com for more complete details on all operations and 
Menu
 options.
TURN ON
Press POWER. The unit turns on and runs through an initial self-check. It 
displays the different bands and their settings and indicates whether or not GPS 
is turned on. 
The 
DFR7 turns on automatically when you start the car.
ADJUST VOLUME
Press VOL + to increase volume. The unit beeps, announces “Volume (0 - 6),” 
and displays a number increase.
Press VOL – to decrease volume. The unit beeps, announces “Volume (0 - 6),” 
and displays a number decrease.
MUTE VOLUME DURING ALERT
You can mute the alert volume during an alert. This is especially useful in 
situations where the alert may be prolonged, such as at red lights.
Press MUTE/DIM during an audio alarm to mute it.
CHANGE THE LCD’S BRIGHTNESS
The backlight has three settings: BRIGHT, DIM, and DARK.