Uniden America Corporation UB330 Manuale Utente

72

To program another channel within the same group, 
press 

, then repeat the above. To create another 

channel group and enter more channels, press 

 

three times, then proceed from “Entering/Editing 
Motorola Channel Groups” on Page 70.

 

 Program System 

  

 

New System 

  

 

EDCS

  

Confirm? Yes=”E” / No=”.”

Next, rotate the scroll control to select the type of 
EDACS system you want to program, then briefly 
press the scroll control to select it.

• WIDE - Use for wideband EDACS systems
• NARROW - Use for narrowband EDACS systems
• SCAT - Use for EDACS SCAT (Single Channel 

Autonomous Trunking)

Confirm? Yes=”E” / No=”.”

The scanner creates an empty EDACS system, with a 
default name of System n       E.  
n is a number that increments as you add new 

systems. E indicates that this is an EDACS system.

Next, refer to the appropriate section to set system-
wide options. For most settings, you can accept the 
default. However, for the items in bold, you must enter 
information in order for your scanner to scan the 
system.

• See “Editing the System Name” on Page 78
• See “Editing the System Quick Key” on Page 79
• See “Setting System Lockout” on Page 79
• See “Setting the System Hold Time” on Page 80
• See “Setting the Channel Delay Time” on Page 80
• See “Setting ID Scan/Search (Trunked Systems 

Only)” on Page 81