Uniden America Corporation UP003R Manuale Utente

www.uniden.com

If you don't have a standard wall plate, you can mount your phone directly to the
wall. Before doing this, consider the following:
• Avoid electrical cables, pipes, or other items behind the mounting location that

could cause a hazard when inserting screws into the wall.

• Try to mount your phone within 5 feet of a working phone jack to avoid excessive

cord lengths.

• Make sure the wall material is capable of supporting the weight of the base 

and handset.

• Use #10 screws (minimum length of 1-3/8 inches) with anchoring devices suitable

for the wall material where the base unit will be placed.

1) Insert two mounting screws into the wall, (with their appropriate

anchoring device), 3-15/16 inches apart. Allow about 1/8 of an
inch between the wall and screw heads for mounting the phone.

2) Refer to steps 1 through 7 on page 13 to mount the telephone.

EXA3245.Qx  12/17/2 6:16 PM  Page 13