Uniden America Corporation UP004R Manuale Utente

www.uniden.com

5) Plug the telephone line cord into the telephone outlet.

6) Raise the antenna to a vertical position.

7) Align the mounting slots on the base with the mounting posts on the wall. Then

push in and down until the phone is firmly seated.

If you don't have a standard wall plate, you can mount your phone directly to the
wall. Before doing this, consider the following:
• Avoid electrical cables, pipes, or other items behind the mounting location that

could cause a hazard when inserting screws into the wall.

• Try to mount your phone within 5 feet of a working phone jack to avoid excessive

cord lengths.

• Make sure the wall material is capable of supporting the weight of the base 

and handset.

• Use #10 screws (minimum length of 1-3/8 inches) with anchoring devices suitable

for the wall material where the base unit will be placed.

1) Insert two mounting screws into the wall, (with their appropriate

anchoring device), 3-15/16 inches apart. Allow about 1/8 of an
inch between the wall and screw heads for mounting the phone.

2) Refer to steps 1 through 7 on page 13 to mount the telephone.

EXAI3248.Qx  12/12/2 8:11 PM  Page 12