Honeywell International Inc. 9PGTPL-100A Manuale Utente

Page 1027

1 Mar 2006

TPL-100A Processor / Part No. 940-0530-001

Use or disclosure of information on this page is subject to the restrictions in the proprietary notice of this document.

Push the Select button when STORED FAULTS (Figure 1005) is the active selectable item 
to show the Stored Faults screen (Figure 1006).  The fault data is shown five legs back 
from the most recent fault to the oldest fault.  The title of the Stored Fault Display shows in 
which leg the stored fault is found.  The title shows the current leg minus the number of 
legs to where the fault is kept.  For example, LEG-2 shows the fault is found two legs back 
from the present leg.  If the current leg equals the leg with the fault, then the title is 
INBOUND.  

The date and time the first fault of the flight leg occurred is shown in the screen title.

PHASE shows the flight phase (1-16) of the faults first occurrence in the flight leg.  
OCCUR shows the number of occurrences of the fault in the fault leg.  

The Figure 1006 is an example of a stored fault procedure.