Honeywell International Inc. 9PGTPL-100A Manuale Utente

Page 1033

1 Mar 2006

TPL-100A Processor / Part No. 940-0530-001

Use or disclosure of information on this page is subject to the restrictions in the proprietary notice of this document.

RBP5A

Advisory Inhibit 1

The four inputs to the TCAS prevent annunciations 
when more important events occur.  The source of the 
four inputs are Input 1, Aircraft System; Input 2, 
Windshear System 1; Input 3, Windshear 2; Input 3, 
EGPWC.

See Table 1011.

RBP5B

Advisory Inhibit 2

RBP5C

Advisory Inhibit 3

RBP5D

Advisory Inhibit 4

RBP5E

Increase Climb Inhibit 1

The following logic applies to the four Increase Climb 
Inhibit Inputs to the TCAS from the system.

(Increase Climb Inhibit 1 AND Increase Climb Inhibit 2) 
OR (Increase Climb Inhibit 3 AND Increase Climb 
Inhibit 4) = Cannot climb at 2500 feet for each minute.

The low is the in operation condition.

RBP5F

Increase Climb Inhibit 2

RBP5G

Increase Climb Inhibit 3

RBP5H

Increase Climb Inhibit 4

RMP1J

Climb Inhibit 1

TCAS is Climb Inhibited when the logic is as follows:  
Climb Inhibit 1 AND Climb Inhibit 2 OR Climb Inhibit 3 
AND Climb Inhibit 4.  The low is the in operation 
condition.

The Climb Inhibit discretes are influenced by the 
landing gear position, flap position, and other aircraft 
configurations that give climb performance.

RMP13G

Climb Inhibit 2

RBP5J

Climb Inhibit 3

RBP5K

Climb Inhibit 4

RBP6A

Data Loader Enable

Data loader enable discrete input to TCAS from the 
data loader.

RMP3D

Advisory/Annunc Cancel

This discrete input gives the procedure for cancelling 
current aural advisory, synthesized voice, and visual 
annunciator alerts. This is an option of the flight crew.  
When cancelled, it stays cancelled until the currently 
active advisory becomes inactive and then active 
again or the current active advisory is replaced by a 
different advisory.

Where 0 = Open = No Advisory Cancel
           1 = Ground = Advisory Cancel