Honeywell International Inc. DMA-37B2 Manuale Utente

Page 2011

10 Oct 2007

DMA-37B DME System

© Honeywell International Inc. Do not copy without express permission of Honeywell.

4

Once complete, the Test Complete, No Failures screen is displayed 

(Figure 2003), or the Test Complete, Failures screen is displayed 

(Figure 2004). Both screens contain two key selections each: MAINT and 

RETURN or MAINT and WHY?, respectively.
• MAINT

For both screens, MAINT is located on the left key. This allows 

the initiation of the extended maintenance pages of the system 

for troubleshooting. Refer to Paragraph D of the FAULT 

ISOLATION section of this manual.

• RETURN In the Test Complete, No Failures screen, the RETURN key to 

the right returns the system to its normal mode screen 

(Figure 2001).

• WHY?

In the Test Complete, Failures screen, the WHY? key to the right 

puts the system into the display-failures mode where individual 

system failures are displayed one on each page. Refer to  

Paragraph C of the FAULT ISOLATION section of this manual.

5

While in the self-test mode, not pressing either key for five minutes causes the 

system to return to the Normal Mode screen (Figure 2001).