Honeywell International Inc. DMA-37B2 Manuale Utente
Page 2011
10 Oct 2007
34-51-02
MAINTENANCE MANUAL
DMA-37B DME System
© Honeywell International Inc. Do not copy without express permission of Honeywell.
Figure 2002. Test in Progress Screen
4
Once complete, the Test Complete, No Failures screen is displayed
(Figure 2003), or the Test Complete, Failures screen is displayed
(Figure 2004). Both screens contain two key selections each: MAINT and
RETURN or MAINT and WHY?, respectively.
• MAINT
• MAINT
For both screens, MAINT is located on the left key. This allows
the initiation of the extended maintenance pages of the system
for troubleshooting. Refer to Paragraph D of the FAULT
ISOLATION section of this manual.
• RETURN In the Test Complete, No Failures screen, the RETURN key to
the right returns the system to its normal mode screen
(Figure 2001).
• WHY?
In the Test Complete, Failures screen, the WHY? key to the right
puts the system into the display-failures mode where individual
system failures are displayed one on each page. Refer to
Paragraph C of the FAULT ISOLATION section of this manual.
5
While in the self-test mode, not pressing either key for five minutes causes the
system to return to the Normal Mode screen (Figure 2001).