Harman International Industries Inc ACBVIBE Manuale Utente

ACV-5100

 Acendo Vibe™ Conferencing Sound Bar with Camera

The ACV-5100 features a hinged Wall Mount Bracket, which allows easy installation 

as well as access to the Connector Bay without having to dismount the unit. The Wall 

Mount Bracket features a cutout for cable routing and straps for cable management.

Camera

Front

Rear

Rubber feet (removable, x2)

mounting holes (x4)

Wall Mount Bracket

Side Panel

Keypad

Cable Pass-Thru

ACV-5100 (FRONT/REAR VIEWS)

MODELS AVAILABLE

ACV-5100GR, Grey (FG4151-00GR)

•

ACV-5100BL, Black (FG4151-00BL)

•

INCLUDED 

ACCESSORIES

15V 

•

 / 4A.Power Supply

Remote Control

•

6' USB 2.0 Cable

•

5mm Wall Mount Spacers (4)

•

Lock-Down Screws (2)

•

DIMENSIONS (HWD)

5" x 23 1/2" x 3 15/16" (127 mm x 590 mm x 100 mm)

•

Depth with optional wall mount spacers: 4 1/8" (105 mm)

•

WEIGHT

6.45 lbs (2.93 kg)

ACTIVE POWER 

REQUIREMENTS

~100-240V, 1.3A max

•

Only use the included power supply

•

REGULATORY 

COMPLIANCE

FCC 47 CFR Part 15, Subpart C / Subpart A (emissions)

EN 55024, EN 60950-1, IEC/EN/UL 60065:2014

ENVIRONMENTAL

Temperature (Operating): 32° F to 113° F (0° C to 45° C)

•

Temperature (Storage): -4° F to 158° F (-20° C to 70° C)

•

Humidity (Operating): 5% to 85% RH non-condensing

•

OPTIONAL 

ACCESSORIES

CBL-USB-FL2-16, USB 2.0 16ft Extension Cable (FG10-2220-16)

•

CBL-USB-FL2-33, USB 2.0 33ft Extension Cable (FG10-2220-33)

•

ACR-5100, Meeting Collaboration System (FG4051-00)

•

Do not lift the ACV-5100 by the camera or rest the unit on the camera.

To ensure highest possible sound quality, the rubber feet on the bottom panel 

must remain in place for surface-mount installations.

The ACV-5100 can sit on a hard, flat surface such as a credenza, tabletop or desk.

When choosing a surface location, consider a space that will not interfere with 

workspaces or other installed devices. Connect cables as necessary - see the 

Connections section for details.

For best aesthetic in wall mount installations, remove the rubber feet from the bottom 

panel: carefully peel each foot off of the bottom surface.

Open the Wall Mount Bracket (held closed by internal magnets).

1. 

Press and hold the 

2. 

Release Button to slide the Bracket out (over the button) to 

disengage the pins on the Bracket from the hinges on the unit (FIG. 2).

Wall Mount Bracket

Hinges/Pins

Release Button

Connector Bay

 

ACV-5100 BOTTOM VIEW - OPENING THE WALL MOUNT BRACKET

Lift the Wall Mount Bracket off of the hinges to remove (FIG. 3):

3. 

Wall Mount Bracket

Pins (x4)

Hinges (x4)

Slide pins in to install

Slide pins out to remove

Release Button

FIG. 3 

ACV-5100 BOTTOM VIEW - REMOVING THE BRACKET

The closer the table is to the 

wall-mounted display. the lower the display should be mounted. As a general 

guide, the display should be mounted between 40" and 48" from the floor.

If the display protrudes from the wall more 

than the ACV-5100, then additional spacing between the display and the ACV-

5100 may be needed.

In small rooms, it may be necessary to 

manuallytilt the camera up to maximize visibility for all participants.

Camera lens should be

positioned beyond the display

to avoid obstructing the view

Display

ACV-5100 Camera

Display

front

(side view)

FIG. 4 

ACV-5100 WALL MOUNT CONSIDERATIONS

The Wall Mount Bracket features instructions etched on the inner surface that describe 

how to position the ACV-5100 beneath a wall-mounted display to avoid obstructing 

the camera view (FIG. 5):

Mounting Bracket 

Mounting Guide

(etched into surface)

(top view)

ACV-5100

Display

USING THE MOUNTING GUIDE

Remove the Bracket from the ACV-5100 (see FIG. 7 on page 9).

1. 

Turn the Bracket vertically and place against the wall, centered directly 

2. 

beneath the wall-mounted display.

Align the top of the Bracket (see 

3. 

Bottom of Display) with the bottom surface of 

the display.

Use the top edge of the notch in the Bracket (see 

4. 

Vibe to determine the closest placement for the ACV-5100 beneath the display. 

Mark the mounting surface.

Align the top flat surface of the ACV-5100 with the mark made in step 4.

5. 

Mount the Bracket using mounting screws and optional mounting spacers (see 

6. 

FIG. 6).

Use the Wall Mount Bracket as a template to mark the locations for the 

1. 

four mounting screws (not included). Use mounting screws and hardware 

appropriate for the surface being utilized to secure the Bracket to the wall.

Optionally, if not hiding them behind the drywall, place the four included Wall 

Mount Spacers between the Bracket and the wall to create a 5mm gap for 

routing flat cables (see FIG. 6).

Mount the Bracket to the

wall via 4 mounting screws

Attach the ACV-5100 to the

Bracket via hinges & pins 

mounting screws

(x4, not included)

mounting spacers (x4, optional)

Note: Use M4 or #8 

mounting screws

Cable Pass-Thru

WALL MOUNTING THE ACV-5100

Attach the ACV-5100 to the Bracket by sliding the pins on the Bracket into the 

2. 

hinges on the rear of the main unit (see FIG. 3):

Position the ACV-5100 with the bottom panel facing the wall and align the 

a. 

hinges on the main unit with the pins on the Bracket.

Carefully slide the pins into the hinges, until the Bracket snaps into place. 

b. 

Note: Press the Bracket into place so that the last pin depresses the 

Release Button, allowing the pins to slide into the hinges (see FIG. 3)

With the ACV-5100 attached to the Bracket, rotate the unit up to its 

c. 

seated position. Note that the Bracket snaps shut and is held closed via 

internal magnets. 

Note: Ensure that cables do not obstruct the complete closing of the unit.