Cisco SFP-OC3-SR-RF Scheda Tecnica
All contents are Copyright © 1992–2005 Cisco Systems, Inc. All rights reserved. Important Notices and Privacy Statement.
Page 1 of 5
DATA SHEET
CISCO SFP OPTICS FOR PACKET-OVER-SONET/SDH AND ATM
APPLICATIONS
APPLICATIONS
The Cisco industry-standard Small Form-Factor Pluggable Interface Converter (SFP) for packet-over-SONET/SDH (POS),
optical networking, and ATM applications (Figure 1) are hot-swappable optical interfaces that plug into a variety of ports
on
Cisco router interfaces. These SFP optics support OC-3, OC-12, and OC-48 data rates for multimode, short-reach,
intermediate-reach, and long-reach applications.
Figure 1. Cisco SFP Optics for POS/SDH and ATM Applications
PRODUCT OVERVIEW
Cisco
®
SFP optics for POS and ATM applications plug into a variety of SFP-based POS, TDM and ATM interfaces on Cisco router products. This
line of SFP optics supports the following three data rates at various reaches: OC-3/STM-1 (155 Mbps), OC-12/STM-4 (622 Mbps), and OC-
48/STM-16 (2,488 Gbps) (Table 1).
The SFPs are compatible with the SONET/SDH and ATM standards, and support the digital diagnostic functions specified in the SFF-8742 Multi-
Source Agreement (MSA) and the extended operating temperature range from 23 to185°F (-5 to 85°C).
Table 1.
Features
Product Description
Typical Distance (km)
Fiber Type
Temperature
Range
(°C)
Digital Optical
Monitoring
Support
SFP OC-3/STM-1 Multimode
2
multimode
-5 to +85
Yes
SFP OC-3/STM-1 Short Reach
2
single mode
-5 to +85
Yes
SFP OC-3/STM-1 Intermediate-Reach
15
single mode
-5 to +85
Yes
SFP OC-3/STM-1 Long-Reach (40 km)
40
single mode
–5 to +85
Yes
SFP OC-3/STM-1 Long-Reach (80 km)
80
single mode
–5 to +85
Yes