Telrad Networks Ltd CPE81003X96 Manuale Utente
Page 19
LED Display
Type
LED
Function
Description
ODU
SYS
System run indicator
Fast Blinking – Device is rebooting.
Solid green – Device is in normal operation.
SIM
SIM card indicator
Light is on – SIM card state is ready.
ETH
LAN port status
Solid Green – LAN port is up.
Blinking Green – LAN data transmission.
Blinking Green – LAN data transmission.
TEL
VoIP Line Status
OFF (Not used for CPE8101)
RF
(4LEDs)
RF Signal Strength
4 level signal strengths indication by 4 green
LEDs.
1st: RSRP < -105dBm
LEDs.
1st: RSRP < -105dBm
2nd: -105dBm <= RSRP < -95dBm
3rd: -95dBm <= RSRP < -85dBm
4th: -85dBm <= RSRP
3rd: -95dBm <= RSRP < -85dBm
4th: -85dBm <= RSRP
RF Signal Adjustment
After the CPE outdoor unit has installed, the direction of antenna’s azimuth and pitch angle
needs to adjust for the best signal strength. In near line of sight condition, the CPE will have
the best signal when the antenna is directly pointing the base station.
the best signal when the antenna is directly pointing the base station.
User can adjust the holder to change the direction and angle of the antenna while observing
the RF LED on the outdoor unit which indicates the signal strength.