Top Victory Electronics Co Ltd CM350S Manuale Utente

5

Power Source:
1.  Make sure the power cord is the correct type that required in your area.
2.  This monitor has a universal power supply that allows operation in either

100/120V AC or 220/240V AC voltage area ( No user adjustment is
required. )

3.  Connect the power cord into your monitor’s power input socket, and then

plug the other end into a 3-pin AC power outlet. The power cord may be
connected to either a wall power outlet or the power outlet socket on your
PC, depending on the type of power cord supplied with your monitor.

Connecting the Video Cable:  the monitor comes with a built-in video cable.
Plug the signal cable

′

s 15-pin connector into the computer's video port and

tighten the two screws on the cable connector. (see figure 2)
Caution: Don’t bend the signal cable, otherwise it will break the inner
wire.
Connecting the Power Cord:  Plug the power cord into the monitor's AC
power jack.   Then   plug  the   power   cord   into a grounded   AC outlet, UL-
approved power strip, or the power output socket on your PC.
Caution: If the AC outlet is not grounded, install the proper grounding
adapter (not supplied).
Connecting the Earphone Cable ( 4VA/4VlrA only  ):  Plug  earphone cable
into earphone output jack.
Connecting the Audio Cable ( 4VA/4VlrA only ):  Plug one end of the  audio
cable into the computer’s multi-media (or sound) card

′

s audio output and

the other end into the monitor's audio input.

Figure 2     Connecting  Cables

1.

AC Inlet