Honeywell International Inc. KTR2280 Manuale Utente
n
KTR 2280 Preliminary H 08/17/06
Rev. 0, Aug/2006
©Honeywell International Inc. Do not print without express permission of Honeywell
Page 3-7
The DME association selection (NAV1, NAV2) and DME Hold mode control are shown in
the DME detail window. The active modes are shown with a large font in white, and the
inactive modes are shown with a smaller font in cyan.
the DME detail window. The active modes are shown with a large font in white, and the
inactive modes are shown with a smaller font in cyan.
3.2.6 ADF TUNING SUB-WINDOW
The Pilot and Copilot ADF functions and display locations are as shown in the following
examples of the ADF tuning sub-window.
examples of the ADF tuning sub-window.
FIGURE 3-9 ADF TUNING SUB-WINDOW
3.2.6.1 ADF FREQUENCY
The ADF frequency is displayed in white on the left side of the ADF tuning sub-window.
3.2.6.2 VOLUME CONTROL INDICATION/SCALE
The volume control scale and the indication of the current volume level are located at the
top of the ADF tuning sub-window in the middle. The volume scale is visible only when the
volume knob is being rotated, and is automatically removed from the display one second
after volume knob rotation ceases.
top of the ADF tuning sub-window in the middle. The volume scale is visible only when the
volume knob is being rotated, and is automatically removed from the display one second
after volume knob rotation ceases.
3.2.6.3 SOFT KEY IDENTIFIER
This shows the function of the soft key on the PFD bezel next to the identifier. The choices
are ADF, ADF1, or ADF2.
are ADF, ADF1, or ADF2.
3.2.6.4 ADF MODE
This shows the function of the soft key on the PFD bezel next to the identifier. The choices
are ADF, ANT, or BFO.
are ADF, ANT, or BFO.