Honeywell International Inc. KX165A Manuale Utente
BENDIX/KING
KX 155A/165A
KX 155A/165A
COMM/NAV SYSTEM
10542I02.ZIPRCD
Page 1-1
Rev 2, Apr/2000
SECTION I
GENERAL INFORMATION
1.1
INTRODUCTION
This manual contains information relative to the physical, mechanical, and electrical characteris-
tics of the Bendix/King Silver Crown KX155A VHF COMM Transceiver/Navigation/VOR/LOC
Glideslope Receiver. Installation and operating procedures are also included.
tics of the Bendix/King Silver Crown KX155A VHF COMM Transceiver/Navigation/VOR/LOC
Glideslope Receiver. Installation and operating procedures are also included.
Information relative to the maintenance, alignment, and procurement of replacement parts may be
found in the KX155A Maintenance/Overhaul Manual, P/N 006-15542-XXXX.
found in the KX155A Maintenance/Overhaul Manual, P/N 006-15542-XXXX.
1.2
EQUIPMENT DESCRIPTION
The KX155A is a VHF NAV/COMM Transceiver which provides the following functions.
A.
Two-way voice communication within the frequency range of 118.00 MHz to
136.975 MHz (760 Channels) in 25 kHz increments.
136.975 MHz (760 Channels) in 25 kHz increments.
B.
Reception of navigation signals within the frequency range of 108.00 MHz to
117.95 MHz in 50 kHz increments (200 channels).
117.95 MHz in 50 kHz increments (200 channels).
C.
Optional reception of glideslope signals within the frequency range of 329.15
MHz to 335.00 MHz in 150 kHz increments (40 channels).
MHz to 335.00 MHz in 150 kHz increments (40 channels).
D.
High level speaker audio output plus limited audio intercom inputs and out-
puts.
puts.
E.
Provides a count down timer.
The KX155A is a panel mounted unit. Connections to the unit are made through one 36 and one
50 pin Molex printed circuit board edge connector and three BNC coax connectors at the rear of
the unit.
50 pin Molex printed circuit board edge connector and three BNC coax connectors at the rear of
the unit.
Electrically, the KX155A consists of the following sections:
•
COMM Transmitter
•
COMM Receiver
•
NAV Receiver
•
Main Board
•
Glideslope Receiver and Converter (Optional)
•
Gas Discharge Display
•
4
Ω
Audio Amplifier
The KX155A is backward compatible with existing KX155 installations. See Section 2.3 Additional
Installation Notes for details.
Installation Notes for details.
PRELIMINARY - SUBJECT TO CHANGE WITHOUT NOTICE