E F Johnson Company 2425M80 Manuale Utente
Draft 02 - Sep 1 2015
4-11
Radio Wide Features
displayed. In addition, (Standard Control Head) or
(Lightning Control Head)is
displayed along with an R in the left Status position.
• To turn radio wide scanning OFF, press the RWS option switch again and “RW SCN
OFF” is briefly displayed and (Standard Control Head) or
(Lightning Control
Head) with R is no longer displayed.
• If the zone or channel is changed while radio wide scanning, scanning continues
normally.
4.12.3 Scan Hold Time
When traffic is received or transmitted while scanning, there is a delay before scanning
resumes. The delay after receiving a call prevents other traffic from being received before
a response can be made. The delay after transmitting a call ensures that a response is heard
and prevents other traffic from occurring on some other channel.
resumes. The delay after receiving a call prevents other traffic from being received before
a response can be made. The delay after transmitting a call ensures that a response is heard
and prevents other traffic from occurring on some other channel.
Separate delay times are programmable for radio wide and priority scanning. With radio
wide scanning, delays of 2 to 7.5 seconds can be programmed. With priority scanning,
delays of 0 to 7.5 seconds can be programmed. With SMARTNET/SmartZone and P25
Trunking scanning, scan delays of 0 to 8 seconds can be programmed.
wide scanning, delays of 2 to 7.5 seconds can be programmed. With priority scanning,
delays of 0 to 7.5 seconds can be programmed. With SMARTNET/SmartZone and P25
Trunking scanning, scan delays of 0 to 8 seconds can be programmed.
4.12.4 Transmitting in the Scan Mode
Priority Scan Mode - When the transmitter is keyed while scanning is enabled, the
transmission may occur on various channels as follows.
transmission may occur on various channels as follows.
Conventional Operation - Transmissions can be programmed to always occur on
the priority, selected, or receive channel (if applicable). Refer to Section 5.10 for
more information.
the priority, selected, or receive channel (if applicable). Refer to Section 5.10 for
more information.
SMARTNET/SmartZone/P25 Trunking Operation - If scanning is halted to
receive a message, programming determines if transmissions occur on the selected or
active channel. Transmissions at other times occur on the selected channel.
receive a message, programming determines if transmissions occur on the selected or
active channel. Transmissions at other times occur on the selected channel.
Radio Wide Scan Mode - The radio can be programmed to transmit on the selected or
active channel similar to SMARTNET/SmartZone and P25 trunking operation just
described.
active channel similar to SMARTNET/SmartZone and P25 trunking operation just
described.