Honeywell International Inc. WFSRM Manuale Utente

SWIFT™ Smart Wireless Integrated Fire Technology Manual — P/N LS10036-000NF-E:C  5/8/2015

43

The W-USB is a software interface that can be connected to a PC (running SWIFT Tools) through a 
USB port. It communicates with the RF devices using the same frequencies as the mesh protocol. 
This device is powered directly by the USB port.

The LED gives an indication of power and initialization status.

The W-USB has an adjustable USB connector to facilitate connection by reducing the size when 
connected to a laptop/tablet. 

This device complies with part 15 of the FCC Rules. Operation is subject to the following two con-
ditions: 

1. This device may not cause harmful interference, and 
2. This device must accept any interference received, including interference that may cause 

undesired operation.

Red

Device has power but is not initialized or the driver is missing.

Yellow

Device is initialized and ready.

Blue

Device is updating or failed to load properly. Complete the update or re-
power the device. If problems persist, contact technical support.

usb

.w

m

f