Honeywell International Inc. WFSSM Manuale Utente
58
SWIFT® Smart Wireless Integrated Fire Technology Manual — P/N LS10036-000SK-E:B 11/9/2017
LED Indicators
LED Pattern
Condition
Action Required
Legend
Number of blinks
LED color
Interval between blink patterns
Duration of LED state
Indicates value is approximate
LED color
Interval between blink patterns
Duration of LED state
Indicates value is approximate
Two blinks in this pattern
First blink is green. Second is yellow
7 seconds between blink patterns
Will transition to next state after
approximately 20 minutes
First blink is green. Second is yellow
7 seconds between blink patterns
Will transition to next state after
approximately 20 minutes
Example:
All units are in seconds. Minute is indicated by “M”.
le
ddev2
_
3.
0.
wm
f
7
20
M
Figure D.4 Device LED Patterns (Continued)
Battery Check: all
batteries present
batteries present
Searching for mesh
(in rescue mode)
(in rescue mode)
Profile
modification
modification
1st mesh
restructuring
restructuring
Normal mode
Searching for mesh
(in formation mode)
(in formation mode)
Minimum of 6 months battery life
remaining
remaining
Device has a profile and can be set as a
distributor or have profile removed
distributor or have profile removed
Mesh is formed and initializing
Device is in the mesh and may be in
trouble
trouble
Profile is assigned and device is
searching for the mesh
searching for the mesh
Profile is assigned and device is
searching for the mesh.
searching for the mesh.
Tamper entry
Device has just been tampered
Ensure the mesh is in rescue mode or wait for
timeout to search mesh in formation mode.
timeout to search mesh in formation mode.
Discovered mesh
Device discovered the mesh
60
Solid
2.5
Use SLC address dials to enter desired mode.
90
3
Ensure the mesh is in formation mode
25
6
5
M
Refer to the FACP to identify the trouble and
possible resolution.
possible resolution.
18
4
Ensure detector is seated in the base and the
module has a faceplate
module has a faceplate
Solid
6
5
Solid
Waiting for a profile
Searching for a profile
Pending site survey
Active/Alarm state
Battery Check:
weak
weak
Device is in factory default mode
Device is in factory default mode and
requesting a profile from a distributor
or gateway
requesting a profile from a distributor
or gateway
Device is in factory default mode and is
ready to enter site survey mode
ready to enter site survey mode
Less than 6 months battery life left or
not all 4 batteries are present
not all 4 batteries are present
Device has been activated
Use SWIFT Tools to assign a profile or activate
magnetic sensor to search for a profile.
magnetic sensor to search for a profile.
Ensure all 4 batteries are present or replace the
batteries
batteries
Clear the tamper condition within
1 minute to enter site survey mode
1 minute to enter site survey mode
10
5
Solid
2.5
3
0.5
1
M
18
12
5
M
Normal mode
Device is in the mesh
Rescue mode
Device is in the mesh and looking for
lost devices
lost devices
Rescue mode
Device is in the mesh and looking for
lost devices
Device may be in trouble
lost devices
Device may be in trouble
12
3
M
Refer to the panel to identify the trouble and
possible solution
possible solution