Airtronics Inc ATX038 Manuale Utente
DSS
Module and Receiver Manual
2.4
G
H
z
AIRTRONICS
Get The Advantage
®
Airtronics Inc
1185 Stanford Court
Anaheim, CA 92805
PH: 714-978-1895 FAX: 714-978-1540
Web: www.Airtronics.net
Contact: info@Airtronics.net
1185 Stanford Court
Anaheim, CA 92805
PH: 714-978-1895 FAX: 714-978-1540
Web: www.Airtronics.net
Contact: info@Airtronics.net
(ST) Steering
Batt
Switch
AA Dry Cell Battery Holder
Mechanical Speed Controller
Electronic Speed Controller Setup
ESC
Switch
To Battery
To Motor
!
CAUTION
When installing your DSS in your model, always make
sure to set your model on a stand so the wheels are free
from any traction before turning on your radio and or
connecting your motor for the first time.
sure to set your model on a stand so the wheels are free
from any traction before turning on your radio and or
connecting your motor for the first time.
To Battery
To Motor
Binding Button
and Blue LED
After installing the DSS Receiver and Module, you are now ready to Bind them together. Binding is the proses that will
match the DSS Receiver to the DSS Module electronically as a match set. You can Bind additional Airtronics DSS
Receivers to your DSS Module to operate many other cars, trucks and or boats.
match the DSS Receiver to the DSS Module electronically as a match set. You can Bind additional Airtronics DSS
Receivers to your DSS Module to operate many other cars, trucks and or boats.
Throttle Fail Safe is a feature that will move the throttle servo to a preset position that you set. If no user preset is added,
the Fail Safe will set it-self to the neutral throttle position.
the Fail Safe will set it-self to the neutral throttle position.
BINDING:
1. Turn the power switch to the ON position on the Transmitter.
The DSS Module LED will turn on after 6 seconds.
2. Depress and hold the DSS Receiver Binding button.
3. Turn the power switch to the ON position on the DSS Receiver and continue holding the Binding button.
The DSS Receiver LED will flash slowly.
4. Release the Binding button on the DSS Receiver after 2 seconds.
5. Depress and hold the Binding button on the transmitter until the LED on the DSS Receiver flashes rapidly.
6. Binding is now complete. Both DSS Module and Receiver LED will now stay on.
7. Operate the controls to confirm.
The DSS Module LED will turn on after 6 seconds.
2. Depress and hold the DSS Receiver Binding button.
3. Turn the power switch to the ON position on the DSS Receiver and continue holding the Binding button.
The DSS Receiver LED will flash slowly.
4. Release the Binding button on the DSS Receiver after 2 seconds.
5. Depress and hold the Binding button on the transmitter until the LED on the DSS Receiver flashes rapidly.
6. Binding is now complete. Both DSS Module and Receiver LED will now stay on.
7. Operate the controls to confirm.
Thank you for purchasing your new DSS Module and Receiver.
The DSS Module and Receiver are to be used in an
Airtronics M8, M11, Super EXZES and Super EXZES Plus.
DO NOT try to use the DSS Module or Receiver in any other
radio system. Please read this manual completely before
installing and or using it. Always keep this manual to use as a
reference. Get the Advantage, Get Airtronics.
The DSS Module and Receiver are to be used in an
Airtronics M8, M11, Super EXZES and Super EXZES Plus.
DO NOT try to use the DSS Module or Receiver in any other
radio system. Please read this manual completely before
installing and or using it. Always keep this manual to use as a
reference. Get the Advantage, Get Airtronics.
Install your DSS Receiver as far away from any electrical components as possible. Route the antenna threw a
plastic tube so that it is in the upright position. With the receiver power switch in the off position, insert the servos and
or ESC as shown in the illustration below.
plastic tube so that it is in the upright position. With the receiver power switch in the off position, insert the servos and
or ESC as shown in the illustration below.
(TH) Throttle
(AUX1) Auxiliary 1
(AUX2) Auxiliary 2
Input 6.0v Max
(TH) Throttle
SERVO CONNECTIONS
DSS MODULE
Before installing your DSS Module, make sure the power switch is in the OFF position. Read the following instructions
first before turning the power switch to the ON position on the transmitter.
first before turning the power switch to the ON position on the transmitter.
Binding Button
and Blue LED
The DSS Module antenna can be rotated 270 left or
right and has 3 positions up and down. Adjust the
DSS Module antenna to your preference.
right and has 3 positions up and down. Adjust the
DSS Module antenna to your preference.
270
o
0
45
90
BINDING (RECEIVER to TRANSMITTER)
THROTTLE FAIL SAFE
After binding of the DSS Module and Receiver, you can set the Throttle Fail Safe feature.
1. Turn the power switch to the ON position on the transmitter. Confirm DSS Module LED is on.
2. Turn the power switch to the ON position on the DSS Receiver. Confirm DSS Receiver LED is on.
3. Move controls to confirm connection between transmitter and receiver.
4. Move throttle lever to your desired Fail Safe position and hold.
NOTE: If the throttle lever is left in the neutral position, Fail Safe will be set at that position.
5. Depress the binding button on the DSS Receiver for 4 seconds. LED will flash slow.
6. Release the throttle lever after the receiver LED starts to flash rapidly.
7. Confirm that the Throttle Fail Safe is working properly by turning the transmitter power switch OFF. Turn the transmitter
power switch back on to confirm full control.
2. Turn the power switch to the ON position on the DSS Receiver. Confirm DSS Receiver LED is on.
3. Move controls to confirm connection between transmitter and receiver.
4. Move throttle lever to your desired Fail Safe position and hold.
NOTE: If the throttle lever is left in the neutral position, Fail Safe will be set at that position.
5. Depress the binding button on the DSS Receiver for 4 seconds. LED will flash slow.
6. Release the throttle lever after the receiver LED starts to flash rapidly.
7. Confirm that the Throttle Fail Safe is working properly by turning the transmitter power switch OFF. Turn the transmitter
power switch back on to confirm full control.
BINDING NOTES
You must rebind and reset Throttle Fail Safe on the DSS Receiver when:
1. You change your M11 from (2 to 4) or (4 to 2) channels.
2. Install your DSS Module from a M11 to M8 or M8 to M11.
2. Install your DSS Module from a M11 to M8 or M8 to M11.
o
WARRANTY
Your Airtronics DSS Module and DSS Receiver are warranted for the period of one year from the original date of
purchase. When in need of any warranty request, send the item to the address below with a detailed note stating the
problem you are having and with a copy of the original sales receipt. Any modifying or abuse of the product will void
any warranty.
The DSS Module and DSS Receiver are not waterproof. Water damage is not covered under any warranty.
purchase. When in need of any warranty request, send the item to the address below with a detailed note stating the
problem you are having and with a copy of the original sales receipt. Any modifying or abuse of the product will void
any warranty.
The DSS Module and DSS Receiver are not waterproof. Water damage is not covered under any warranty.
FCC INFORMATION
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device
may not cause harmful interference, and (2) This device must accept any interference received, including interference
that may cause undesired operation.
may not cause harmful interference, and (2) This device must accept any interference received, including interference
that may cause undesired operation.
Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment.
authority to operate the equipment.
This product contains a radio transmitter with wireless technology which has been tested and found to be compliant with
the applicable regulations governing a radio transmitter in the 2.400GHz to 2.4835GHz frequency range.
the applicable regulations governing a radio transmitter in the 2.400GHz to 2.4835GHz frequency range.
The associated regulatory agencies of the following countries recognize the noted certifications for this product as
authorized for sale and use:
authorized for sale and use:
USA
Denmark
Germany
Germany
Spain
Canada
France
Italy
Sweden
Belgium
Finland
Netherlands
UK