Motorola Solutions Inc. 92FT7045 Manuale Utente
Please retain for future use
6802987C69-A
@6802987C69@
September, 2011
Motorola Solutions, Inc. 1301 E. Algonquin Road, Schaumburg, IL 60196 U.S.A.
MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M logo are trade-
marks or registered trademarks of Motorola Trademark Holdings, LLC and are used
under license. All other trademarks are the property of their respective owners.
© 2005 – 2011 Motorola Solutions, Inc. All rights reserved.
marks or registered trademarks of Motorola Trademark Holdings, LLC and are used
under license. All other trademarks are the property of their respective owners.
© 2005 – 2011 Motorola Solutions, Inc. All rights reserved.
RF Energy Exposure and Product Safety Guide for
Subscriber Modem installed in Vehicles
Subscriber Modem installed in Vehicles
ATTENTION!
.
RF Energy Exposure Awareness and Control Informa-
tion, and Operational Instructions for FCC Occupational
Use Requirements
.
This vehicular subscriber modem uses electromagnetic energy in the radio
frequency (RF) spectrum to provide communications between two or more
users over a distance.
It uses radio frequency (RF) energy or radio waves to send and receive
calls. RF energy is one form of electromagnetic energy. Other forms
include, but are not limited to, sunlight and x-rays. RF energy, however,
should not be confused with these other forms of electromagnetic energy,
which when used improperly, can cause biological damage. Very high lev-
els of x-rays, for example, can damage tissues and genetic material.
Experts in science, engineering, medicine, health, and industry work with
organizations to develop standards for safe exposure to RF energy. These
standards provide recommended levels of RF exposure for both workers
and the general public. These recommended RF exposure levels include
substantial margins of protection.
All Motorola modems are designed, manufactured, and tested to ensure
they meet government-established RF exposure levels. In addition, manu-
facturers also recommend specific operating instructions to users of
modems. These instructions are important because they inform users
about RF energy exposure and provide simple procedures on how to con-
trol it.
Please refer to the following Web sites for more information on what RF
energy exposure is and how to control your exposure to assure compliance
with established RF exposure limits.
http://www.fcc.gov/oet/rfsafety/rf-faqs.html
frequency (RF) spectrum to provide communications between two or more
users over a distance.
It uses radio frequency (RF) energy or radio waves to send and receive
calls. RF energy is one form of electromagnetic energy. Other forms
include, but are not limited to, sunlight and x-rays. RF energy, however,
should not be confused with these other forms of electromagnetic energy,
which when used improperly, can cause biological damage. Very high lev-
els of x-rays, for example, can damage tissues and genetic material.
Experts in science, engineering, medicine, health, and industry work with
organizations to develop standards for safe exposure to RF energy. These
standards provide recommended levels of RF exposure for both workers
and the general public. These recommended RF exposure levels include
substantial margins of protection.
All Motorola modems are designed, manufactured, and tested to ensure
they meet government-established RF exposure levels. In addition, manu-
facturers also recommend specific operating instructions to users of
modems. These instructions are important because they inform users
about RF energy exposure and provide simple procedures on how to con-
trol it.
Please refer to the following Web sites for more information on what RF
energy exposure is and how to control your exposure to assure compliance
with established RF exposure limits.
http://www.fcc.gov/oet/rfsafety/rf-faqs.html
Federal Communication Commission Regulations
The FCC rules require manufacturers to comply with the FCC RF energy
exposure limits for mobile modems before they can be marketed in the U.S.
When modems are used as a consequence of employment, the FCC
requires users to be fully aware of and able to control their exposure to
meet occupational requirements. Exposure awareness can be facilitated by
the use of a label directing users to specific user awareness information.
Your Motorola modem has a RF exposure product label. Also, your Motor-
ola user manual, or separate safety booklet, includes information and oper-
ating instructions required to control your RF exposure and to satisfy
compliance requirements.
exposure limits for mobile modems before they can be marketed in the U.S.
When modems are used as a consequence of employment, the FCC
requires users to be fully aware of and able to control their exposure to
meet occupational requirements. Exposure awareness can be facilitated by
the use of a label directing users to specific user awareness information.
Your Motorola modem has a RF exposure product label. Also, your Motor-
ola user manual, or separate safety booklet, includes information and oper-
ating instructions required to control your RF exposure and to satisfy
compliance requirements.
Compliance with RF Exposure Standard
Your Motorola vehicular subscriber modem is designed and tested to com-
ply with a number of national and international standards and guidelines
(listed below) regarding human exposure to radio frequency electromag-
netic energy.
ply with a number of national and international standards and guidelines
(listed below) regarding human exposure to radio frequency electromag-
netic energy.
In terms of measuring RF energy for compliance with FCC exposure guide-
lines, your vehicular subscriber modem radiates measurable RF
energy only while it is transmitting (during data transmission), not when
it is receiving (data receiving) or in standby mode.
lines, your vehicular subscriber modem radiates measurable RF
energy only while it is transmitting (during data transmission), not when
it is receiving (data receiving) or in standby mode.
Your Motorola vehicular subscriber modem complies with the follow-
ing RF energy exposure standards and guidelines:
• United States Federal Communications Commission (FCC), Code of
Federal Regulations; 47 CFR et seq.
• FCC, OET Bulletin 65
• Institute of Electrical and Electronic Engineers (IEEE) C95.1
• International Commission on Non-Ionizing Radiation Protection
• Institute of Electrical and Electronic Engineers (IEEE) C95.1
• International Commission on Non-Ionizing Radiation Protection
(ICNIRP)
• Ministry of Health (Canada) Safety Code 6
• Industry Canada RSS-102
• Australian Communications Authority Radiocommunications Standard
• Industry Canada RSS-102
• Australian Communications Authority Radiocommunications Standard
et seq.
• ANATEL ANNEX to Resolution No. 303 et seq.
RF Exposure Compliance and Control Guidelines and
Operating Instruction
To control exposure to yourself and others and to ensure compliance
with the RF exposure limits, always adhere to the following proce-
dures.
Guidelines:
• User awareness instructions should accompany device when trans-
Guidelines:
• User awareness instructions should accompany device when trans-
ferred to other users.
• DO NOT use this device if the operational requirements described
• DO NOT use this device if the operational requirements described
herein are not met.
• Transmit only when people outside the vehicle are at least the rec-
ommended minimum lateral distance away, as shown in Table 1,
from the body of a vehicle with a properly installed antenna. This
separation distance will ensure that there is sufficient distance from a
properly installed (according to installation instructions) externally-
mounted antenna to satisfy the RF exposure requirements in the stan-
dards listed above.
from the body of a vehicle with a properly installed antenna. This
separation distance will ensure that there is sufficient distance from a
properly installed (according to installation instructions) externally-
mounted antenna to satisfy the RF exposure requirements in the stan-
dards listed above.
NOTE: Table 1 below lists the recommended lateral distance for peo-
ple in an uncontrolled environment from the body of a vehicle with an
approved, properly installed transmitting antenna (i.e., monopoles over
a ground plane, or dipoles) at several different ranges of rated radio
power for mobile radios installed in a vehicle.
approved, properly installed transmitting antenna (i.e., monopoles over
a ground plane, or dipoles) at several different ranges of rated radio
power for mobile radios installed in a vehicle.
Table 1. Rated Power of Vehicle-Installed Mobile modem and Recom-
mended Minimum Lateral Distance from Vehicle Body
• When a mobile radio is used in conjunction with another co-located
transmitter such as a Vehicular Repeater, it is the vehicle operator’s
responsibility to take appropriate steps to keep bystanders at the
required separation distance from the vehicle to ensure compliance
with the FCC's RF energy exposure limits for the general population.
See the co-located transmitter’s user manual for more details.
responsibility to take appropriate steps to keep bystanders at the
required separation distance from the vehicle to ensure compliance
with the FCC's RF energy exposure limits for the general population.
See the co-located transmitter’s user manual for more details.
NOTE: If you are not sure of the rated power of your radio, contact your
Motorola representative or dealer and supply the radio model number
found on the radio model label. If you can not determine the rated power
out, then assure 3-feet separation from the body of the vehicle. The maxi-
mum power shown on the FCC Grant may be higher than the rated power
allowing for production variation.
Motorola representative or dealer and supply the radio model number
found on the radio model label. If you can not determine the rated power
out, then assure 3-feet separation from the body of the vehicle. The maxi-
mum power shown on the FCC Grant may be higher than the rated power
allowing for production variation.
BEFORE USING THIS
RADIO, READ THIS GUIDE WHICH
CONTAINS IMPORTANT OPERAT
ING INSTRUCTIONS FOR
SAFE USAGE AND RF ENERGY
AWARENESS AND CONTROL
INFORMATION FOR COMPLI
ANCE WITH RF ENERGY
EXPOSURE LIMITS IN APPLICABLE
NATIONAL AND
INTERNATIONAL STANDARDS.
Mobile Radio Rated
Power (see Note)
Minimum Lateral Distance from
Vehicle Body
Less than 7 Watts
8 Inches (20 centimeters)
7 to 14 Watts
1 foot (30 centimeters)
15 to 39 Watts
2 feet (60 centimeters)
40 to 110 Watts
3 feet (90 centimeters)
Vehicular
Subscriber Modem
VML700
ab