Authinx Inc. R24945 Manuale Utente

Your FOFA Remote requires only 2 simple steps to
begin using it:

If you just inserted the batteries, you are already in
setup mode. To enter the setup mode at any other
time, press and hold the FIND button, then press and
release button # 1, then release the FIND button. The
FOFA is in setup mode when the LED flashes
continuously and a warble beep is emitted.

To set:

• Press and release the FIND button.
• Press the button (1 thru 6) to program the SET#.

The FOFA will beep and the LED will flash more
quickly.

• Press the button (1 thru 6) to program the ITEM#.

The FOFA Remote will beep to confirm your settings.
The FOFA Remote beeps the number corresponding
to the SET # and then, after a brief pause, beeps the
number of times corresponding to the ITEM #.

To program FOFA as Set 2, Item 5, for example, you
would:

• Press and release the FIND button.
• Press 2. This programs the SET number to 2. The

LED flashes quickly.

• Press 5. This programs the ITEM number to 5. The

FOFA Remote beeps and flashes 2 times, pauses,
and then beeps 5 times to confirm the setting.

Removing the batteries will cause your FOFA Remote
to lose its setting. You will need to reprogram it using
the steps above.

If you do not program the FOFA Remote, it will
respond to every key press from another FOFA unit.
However, the unprogrammed FOFA Remote will
enter setup mode when you press FIND, then any #
button on it.

To find an object with a missing FOFA Keyfob
attached, simply press FIND on your FOFA Remote,
then press the # key corresponding to the missing unit
in that set.
If the object is in range, the FOFA Keyfob on the
missing object will begin to flash and beep. You can
use any FOFA to locate any other FOFA; hence the
name, Find One, Find All!

To find a missing item in another set of FOFAs, you
will need to reprogram one of your FOFAs to that set.
Please see Programming your FOFA Remote.

For best results, hold FOFA Remote with the LED
pointing away from you. Walk around while trying to
find the item you’re looking for while repeatedly
pressing the appropriate button on the FOFA Remote.

Reduce or eliminate noises so you can hear the
beeping FOFA Keyfob you are looking for.

Keep FOFA Remote away from large metal objects
and other radios sources that might reduce its range,
as do weak batteries also.

You can verify the SET and ITEM numbers of each
FOFA at any time. Press and hold the FIND button,
then press and release button # 2, then release the
FIND button. The LED flashes and beeps first to
indicate the SET number, pauses, and then flashes and
beeps to indicate the ITEM number. For example, if
the FOFA Remote you are checking is defined as SET
1, ITEM 2, you would hear 1 beep, a pause, then 2
more beeps.

- Do not allow FOFA to become wet. Wipe dry

immediately if it gets wet.

- FOFA may be wiped with a damp cloth to clean.
- Handle FOFA with care. Do not drop.

This device complies with Part 15 of the FCC Rules.
Operation is subject to the following conditions: 1.
This device may not cause harmful interference; 2.
This device must accept any interference received,
including interference that may cause undesired
operation. This equipment generates and uses radio
frequency energy, and if not installed and used
properly, that is, in strict accordance with the
manufacturers instructions, it may cause interference
to radio and television reception. It has been type
tested and found to comply with the limits for remote
control devices in accordance with the specifications
in Sub-Parts B and C of Part 15 of FCC Rules, which
are designed to provide reasonable protection against
such interference in a residential installation.
However, there is no guarantee that interference will
not occur in a particular installation. If this equipment
does cause interference to radio or television
reception, which can be determined by unplugging
the equipment, try to correct the interference by one
or more of the following measures.

• Reorient the antenna of the radio/TV experiencing

the interference.

• Relocate the equipment with respect to the radio/TV.
• Move the equipment away from the radio/TV.
• Plug the equipment into an outlet on a different

electrical circuit from the radio/TV experiencing the
interference.

• If necessary, consult your local dealer for additional

suggestions.

The manufacturer is not responsible for any radio or
TV interference caused by unauthorized modifica-
tions to this equipment. Such modifications could
void the user’s authority to operate the equipment.

FOFA locators are expandable to 36 unique locators.
How is this possible with only 6 buttons? You have 6
sets of 6 items. This gives you the flexibility to
customize your FOFA locators so that each person in
the family has a different set of FOFA’s.

To set the FOFA Remote, you must first decide on the
“SET” number and the “ITEM” number of each
FOFA Remote. Most first-time users select SET 1 and
ITEMS 1-6.

Insert 2 AAA alkaline
batteries in the battery
compartment on the back
of the FOFA Remote. The
FOFA Remote will beep
and immediately go into
setup mode. The LED
will begin flashing to
indicate that the FOFA
Remote is ready to be
programmed. See step 2
below, Programming
your FOFA Remote.

For setup and for finding
up to 6 items.

FIND

1. Insert the batteries.
2. Program the FOFA

SET and ITEM
numbers.

FOFA R24945 1-2

FOFA R24945 2-2