UTC Fire & Security Americas Corporation Inc RF4004-01-2 Manuale Utente

466-2283A • June 2007

Copyright © 2007, GE Security Inc.

This is the GE 4-Button Slimline Keyfob Installation Instruc-
tions. The keyfob enables you to turn the system on and off after 
exiting or before entering the home or to turn on the siren and 
call the central monitoring station if there is an emergency. If 
lamp modules have been installed, you can use the keyfob to turn 
all system-controlled lights on or off.
The keyfob is a lithium coin battery-powered, wireless keyfob 
designed to fit on a keychain, in a pocket, or in a purse. It 
provides a convenient option for the following system           
operations:

• Arm the system (doors, windows, and motion sensors).
• Arm the system with no entry delay (if programmed).
• Disarm the system.
• Trigger panic alarms.
• Turn system-controlled lights on or off.
• Open the garage door or turn outside lights on (if 

programed).

Refer to your control panel documentation for instructions on 
programming and sensor testing your keyfob. Use the following 
guidelines to add keyfobs to the system:

• Program (learn) the keyfobs into the control panel as nonsu-

pervised sensors.

• Each learned keyfob uses one of the available sensor 

numbers.

• Use sensor group number 01, 03, 06, or 07.

Refer to your control panel documentation to initiate panel test 
mode, then test the keyfob by pressing the keyfob buttons 
(Figure 1):

Unlock button.  Disarms the control panel. The doors, 
windows, and motion sensors are disarmed.

Lock button.  The following key presses will depend on 
your control panel configuration.

• If pressed once, the control panel arms doors and 

windows (stay mode).

• If pressed twice, the control panel arms motion 

sensors, doors, and windows (away mode).

• If pressed three times, the control panel activates the 

latchkey feature when this option is off (Simon 3 and 
Simon XT only).

Lock and Unlock buttons.  If the keyfob is programmed 
(learned) as an intrusion, silent alarm, or emergency sensor 
type, when you press the Lock and Unlock buttons simulta-
neously, the keyfob will activate alarm reports to the central 
station. These two buttons are also used to test the sensor.

Light button.  Toggles system-controlled lights on/off.

Star button.  If used with the X-10 universal module, the 
control panel will cause the garage door to open or close.

This device complies with part 15 of the FCC rules. Operation is subject to the 

following conditions: 
1. This device may not cause harmful interference. 
2. This device must accept any interference received, including interference 

that may cause undesired operation. 

Changes or modifications not expressly approved by the party responsible for 

compliance could void the user’s authority to operate the equipment. 

Power source

CR2025 3V, 165 mAh lithium coin battery

Dimensions (L x W x H)

2.2 x 1.2 x 0.4 in. (57 x 32 x 11 mm)

Typical battery life

5 to 8 years

Operating temperature

32 to 120°F (0 to 49°C)

Toll-free: 888.GESECURity (888.437.3287 in the US, including Alaska and Hawaii; Puerto Rico; Canada). 

Outside the toll-free area: Contact your local dealer.