HP 5185-3843 Manuale Utente
3-2 Making a Wireless Network Connection
Factory-Default Wireless Settings
Parameter
Setting
Comments
Communications
Mode
Mode
Ad Hoc
If your network uses an access point, you must reconfigure
the Communications Mode of the HP Jetdirect print server
to “Infrastructure”.
the Communications Mode of the HP Jetdirect print server
to “Infrastructure”.
Channel
10
(Ad hoc mode only) This specifies the broadcast channel
if the print server fails to connect to a network. In most
cases, you will not need to change this setting. The print
server will scan all available channels for the specified
network and will adapt its channel to the one detected.
if the print server fails to connect to a network. In most
cases, you will not need to change this setting. The print
server will scan all available channels for the specified
network and will adapt its channel to the one detected.
Network Name
(SSID)
(SSID)
hpsetup
You must change the SSID on the print server to match your
network. In infrastructure mode, you must match the SSID
configured on the access point.
network. In infrastructure mode, you must match the SSID
configured on the access point.
Authentication
Open
System
System
The HP Jetdirect print server is not configured for network
authentication. If required by your network, the proper
authentication method must be configured on the HP
Jetdirect print server.
authentication. If required by your network, the proper
authentication method must be configured on the HP
Jetdirect print server.
Encryption (WEP) none
If your network uses WEP encryption keys, you must
configure the encryption keys on the print server. You can
configure up to four WEP keys. The active key must match
the value and active key position (for example, Key 1)
configured on other wireless devices.
configure the encryption keys on the print server. You can
configure up to four WEP keys. The active key must match
the value and active key position (for example, Key 1)
configured on other wireless devices.