Ningbo Lumiaudio Electronic Technology LTD FLC Manuale Utente
Packing List
1
2
3
USER
MANU
MANU
AL
user manual
speaker grill
cutout template
speaker
power adapter
Introduction
Note: The master speaker has an installed depth of 3.7”(95mm)
225
9
8
9
5
205
This Bluetooth Ceiling Speaker has a variety of inputs and
outputs as shown in the below:
Power Input – Connect the included Power Adapter to the Power
Input.
RCA Inputs – Connect to the RCA line output of devices such as
CD/DVD players.
Speaker Output –Drive a second slave speaker.
outputs as shown in the below:
Power Input – Connect the included Power Adapter to the Power
Input.
RCA Inputs – Connect to the RCA line output of devices such as
CD/DVD players.
Speaker Output –Drive a second slave speaker.
Connection Reset Button
Pivoting Tweeter
Environmental Equalizer
(+/-3db)
(+/-3db)
Built-in Amplifier
& Bluetooth Driver
& Bluetooth Driver
Power Input 24V/2.5A
Speaker Output
R+ (Red) R- (Black)
Dog Leg Mounts (4)
6.5" (165mm)
Kevlar Woven Cone
Kevlar Woven Cone
Stereo/Mono
Volume Limit 50%/100%
LED Indicator
1
2
3
Magnets for Grill (8)
4
5
6
RCA Input
7
9
10
8
11
12
13
9
Bluetooth Connection Pairing
Begin by applying power to the Master Speaker. The Bluetooth
status indicator on the speaker will blink BLUE to indicate it is
available to be paired to your device. Turn your device’s
Bluetooth function ON and select “BT-Speaker”. The BLUE light
will become steady and you will hear a tone indicating your
Bluetooth is successfully paired.
Note: If your device fails to pair, remove and re-insert the power
cable or press the reset button to restart the pairing process.
status indicator on the speaker will blink BLUE to indicate it is
available to be paired to your device. Turn your device’s
Bluetooth function ON and select “BT-Speaker”. The BLUE light
will become steady and you will hear a tone indicating your
Bluetooth is successfully paired.
Note: If your device fails to pair, remove and re-insert the power
cable or press the reset button to restart the pairing process.
7
RCA Input
Connect the RCA outputs of your device (CD/DVD) to the RCA inputs
found on the Master Speaker.
Caution: Please ensure the speaker is in close state before
connecting RCA audio.
Note: RCA audio and Bluetooth music will not work at the same time.
found on the Master Speaker.
Caution: Please ensure the speaker is in close state before
connecting RCA audio.
Note: RCA audio and Bluetooth music will not work at the same time.
Volume Limit
8
Switch to set the volume limit to 50% or 100% on the speaker.
Stereo/Mono Switch
6
Please turn on“stereo”to open stereo mode when a slave speaker
is attached. If not, please switch to“mono”mode.
Caution: Use this switch slowly.
is attached. If not, please switch to“mono”mode.
Caution: Use this switch slowly.
Connection Reset Button
1
If the speaker cannot be operated, long press the RESET button for 5
seconds to reset to factory settings.
Caution: Please ensure your speaker has power during reset, or the
speaker’s ability to operate will be damaged.
seconds to reset to factory settings.
Caution: Please ensure your speaker has power during reset, or the
speaker’s ability to operate will be damaged.
LED Indicator
2
Blue flash – Pairing mode
Steady blue – Connected
Steady green – RCA mode
Red flash – Standby
Quick red flash – Amplifier error
Steady blue – Connected
Steady green – RCA mode
Red flash – Standby
Quick red flash – Amplifier error
Tip: The amplifier has a built-in over and under voltage protection
along with short circuit and thermal protection.A failure in any of
these areas your amplifier will shut off automatically and restart once
power and/or the problem has been corrected.
along with short circuit and thermal protection.A failure in any of
these areas your amplifier will shut off automatically and restart once
power and/or the problem has been corrected.
Specifications
RMS Power 60W (30W Master/30W Slave)
Impedance(
Impedance(
:8
Sensitivity (1W/1m): 90dB
Type: Class D (Digital)
Bluetooth System: Bluetooth V4.1
Bluetooth Range: >10m (33ft)
ID Device Name: BT Speaker
Power Input: DC 24V/2.5A
Type: Class D (Digital)
Bluetooth System: Bluetooth V4.1
Bluetooth Range: >10m (33ft)
ID Device Name: BT Speaker
Power Input: DC 24V/2.5A
Frequency Response: 60Hz - 20kHz
:
ohm)
1. This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including
interference that may cause undesired operation.
2.Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to
operate the equipment.
NOTE: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
FCC Statement