Biolog-id SSTRBIOLOGID Manuale Utente
Smart Storage for fridge : user manual
Backup date
12/05/2017 17:14:00
Version
0.10
Author
Loïc Marouteau
Manual validation date: 19/04/2017
19 sur 29
RISK
SAFETY INSTRUCTIONS
Electrical
Before connecting and commissioning the machine, check that the
power supply is connected correctly.
Ensure that the device connecting plug is readily accessible so that it
can be pulled out easily when necessary, without having to push other
devices out of the way.
The power plug serves as a network disconnection device.
power supply is connected correctly.
Ensure that the device connecting plug is readily accessible so that it
can be pulled out easily when necessary, without having to push other
devices out of the way.
The power plug serves as a network disconnection device.
Mechanical
Regularly check the fixings.
Make sure that only trained operators who are familiar with the safety
measures use the SST-R
Make sure that only trained operators who are familiar with the safety
measures use the SST-R
Mechanical
Only pull out the drawers using the handles provided
4.2 RF radiation hazards.
The SST-R electronic system antennas each emit a frequency of 13.56 MHz
with a power output of 200 mW (the law applicable to the design of RFID
readers prohibits a power output over 2 W).
MEDICAL ELECTRICAL DEVICES require special EMC precautions. The SST-R
must be installed and commissioned in accordance with the EMC data
supplied in the ACCOMPANYING DOCUMENTS.
Portable or mobile RF communication devices can affect MEDICAL
ELECTRICAL DEVICES
Using ACCESSORIES, transducers or cables other than those specified can
increase EMISSIONS or reduce the IMMUNITY of the DEVICE or EM SYSTEM.
This does not include transducers and cables sold by the MANUFACTURER of
the DEVICE or the EM SYSTEM and used as spare parts to replace internal
components.
The DEVICE or EM SYSTEM must not be used beside other devices or stacked
on top of them.
The DEVICE or EM SYSTEMS can be affected by interference caused by other
devices even if they comply with CISPR EMISSION requirements.
with a power output of 200 mW (the law applicable to the design of RFID
readers prohibits a power output over 2 W).
MEDICAL ELECTRICAL DEVICES require special EMC precautions. The SST-R
must be installed and commissioned in accordance with the EMC data
supplied in the ACCOMPANYING DOCUMENTS.
Portable or mobile RF communication devices can affect MEDICAL
ELECTRICAL DEVICES
Using ACCESSORIES, transducers or cables other than those specified can
increase EMISSIONS or reduce the IMMUNITY of the DEVICE or EM SYSTEM.
This does not include transducers and cables sold by the MANUFACTURER of
the DEVICE or the EM SYSTEM and used as spare parts to replace internal
components.
The DEVICE or EM SYSTEM must not be used beside other devices or stacked
on top of them.
The DEVICE or EM SYSTEMS can be affected by interference caused by other
devices even if they comply with CISPR EMISSION requirements.