DISPLAY & TECHNOLOGY LIMITED 24G-WR1001NS Manuale Utente

WR1001NS

 

22

reception packet counters for each associated wireless client. 

These settings are only for more technically advanced users who have a sufficient 

knowledge about wireless LAN. These settings should not be changed unless you know 

what effect the changes will have on your Access Point.   

Fragment Threshold: This value is the maximum size determining whether packets will 

be fragmented. Setting the Fragmentation Threshold too low may result in poor network 

performance since excessive packets.   

RTS Threshold: RTS stands for “Request to Send”. This parameter controls what size 

data packet the frequency protocol issues to RTS packet. The default value of the 

attribute is 2347. It is recommended not to modify this value in SOHO environment. 

Beacon Interval: Enter a value between 20-1024 milliseconds for Beacon Interval here. 

The beacons are the packets sent by the router to synchronize a wireless network. 

Beacon Interval value determines the time interval of the beacons.   

IAPP: Inter-Access Point Protocol. 

Short GI: This function is recommended for it will increase the data capacity by reducing 

the guard interval time. 

STBC: Space Time Block Coding improves reception by coding the data stream in blocks. 

RF Output Power: Here you can specify the RF output power of router.     

This page allows you setup the wireless security. Turn on WEP or WPA by using 

Encryption Keys could prevent any unauthorized access to your wireless network.