Shenzhen Benton Technology Co. LTD RNBV1 Manuale Utente
1.
appearance
and
button:
1.1 Touch panel
7” Capacitive touch panel: In The Operation, to click,
drag on the touch panel.
7” Capacitive touch panel: In The Operation, to click,
drag on the touch panel.
1.2 POWER
Start up: Long Press and hold the power button, the
system will enter the main interface.
Start up: Long Press and hold the power button, the
system will enter the main interface.
shut down: In the main menu interface, Press the
power button about 5 seconds to shut down. The
system will hint "power off" option, Click ”ok”. You can
safely shut it down.
system will hint "power off" option, Click ”ok”. You can
safely shut it down.
Lock screen: Short press power button to lock screen
or unlock screen.
or unlock screen.
【Remark】
a. When power is used, system will shut down
automatically.
b. Illegally turn off the device, restart will scan and
restore the disk. It may take longer time to enter into
system or cause system crash.
a. When power is used, system will shut down
automatically.
b. Illegally turn off the device, restart will scan and
restore the disk. It may take longer time to enter into
system or cause system crash.
1.3 DC port
Charging through DC charger.
Charging through DC charger.
1.4 Micro USB
Micro USB jack: Charging through USB charger or
you can use it to connect the computer for data
transmission and external connection USB flash drive
through OTG cable.
Micro USB jack: Charging through USB charger or
you can use it to connect the computer for data
transmission and external connection USB flash drive
through OTG cable.
1.5 MIC
Record microphone.
Record microphone.
1.6 earphone jack
3.5 mm standard earphone jack.
3.5 mm standard earphone jack.
1.7 Volume +, Volume-
The buttons Volume +, Volume- achieve changes in
the volume.
The buttons Volume +, Volume- achieve changes in
the volume.
1.8 TF card
TF-CARD slot: external T-FLASH card
TF-CARD slot: external T-FLASH card
1.9 Camera
There are front camera and rear camera to take
photos.
There are front camera and rear camera to take
photos.
2. First use
2.1 Battery management and charge
Before first use, please make sure the device is fully
charged. If not, just need to connect the USB adaptor
or connect to Computer by USB cable, then you can
charge.
2.1 Battery management and charge
Before first use, please make sure the device is fully
charged. If not, just need to connect the USB adaptor
or connect to Computer by USB cable, then you can
charge.
The first two times please keep charging about 6
hours, after that you just need to charge 4 hours.
hours, after that you just need to charge 4 hours.
【Remark】: This tablet using Built-in polymer battery,
Charge must choose.
standard adaptor (Input: AC110~240V 50/60Hz
Max:180MA.. Output: DC5.0~5.5V/1.5-2A)
During the charging, the battery icon will scroll or
have flashing indicate in battery icon.
When finish charging, battery icon will become green
and stop rolling.
In order to prolong the service life of the machine, you
are advised to use up the battery power to about 15%
before charging it.
Charge must choose.
standard adaptor (Input: AC110~240V 50/60Hz
Max:180MA.. Output: DC5.0~5.5V/1.5-2A)
During the charging, the battery icon will scroll or
have flashing indicate in battery icon.
When finish charging, battery icon will become green
and stop rolling.
In order to prolong the service life of the machine, you
are advised to use up the battery power to about 15%
before charging it.
【Remarks】:
a. If you don’t to use this Tablet for long time, in order
to avoid no power damage, please charge/play the
device once a month.
b. After shut down for low battery, connect USB
adaptor, device will remind low battery, need to wait
some time until the battery is enough power to enter
into main menu.
a. If you don’t to use this Tablet for long time, in order
to avoid no power damage, please charge/play the
device once a month.
b. After shut down for low battery, connect USB
adaptor, device will remind low battery, need to wait
some time until the battery is enough power to enter
into main menu.
c. Device charging should be in standby status for
normal charging time.
Because with device and screen power consumption,
it may cause longer charging time.
normal charging time.
Because with device and screen power consumption,
it may cause longer charging time.
2.2 Connection with PC
Use USB cable to connect device to PC. The unit is a
“generic USB Device” and does not need any extra
software drivers to connect to your PC. After your PC
has recognized the unit, you will see a message on
the bottom of your PC screen informing you. (If your
PC warns: Drivers not installed, ignore this)
To complete the connection, you need to reveal the
Notifications Screen on the unit. You will see the
notification menu similar to this:
Use USB cable to connect device to PC. The unit is a
“generic USB Device” and does not need any extra
software drivers to connect to your PC. After your PC
has recognized the unit, you will see a message on
the bottom of your PC screen informing you. (If your
PC warns: Drivers not installed, ignore this)
To complete the connection, you need to reveal the
Notifications Screen on the unit. You will see the
notification menu similar to this:
Select USB connected.
You will then see this screen:
You will then see this screen:
Select Turn on USB storage.
In the load mode, you can copy, delete the file on the
device and the file on the memory card.
In the load mode, you can copy, delete the file on the
device and the file on the memory card.
3. Equipment operation interface
3.1 Main interface
After start-up, it will enter the home screen.
3.1 Main interface
After start-up, it will enter the home screen.
In home screen, you can manage the software
ICONS: long press the ICONS 3 seconds, after the
icons will be bigger, then you can drag anywhere in
the interface.
Delete ICONS: long press the ICON for 3 seconds,
drag the icons to the mark “X”, after that you can
delete icon.
In the home screen, when you press “
ICONS: long press the ICONS 3 seconds, after the
icons will be bigger, then you can drag anywhere in
the interface.
Delete ICONS: long press the ICON for 3 seconds,
drag the icons to the mark “X”, after that you can
delete icon.
In the home screen, when you press “
”, it will go to
main interface.
In the main interface, you can touch the icon to open
the APPs
the APPs
3.2 status bar
The status bar above of the screen
Top right corner display : battery charge icons, current
time.
Bottom display: ESC button, Menu, Recent
applications, Screenshot, Volume -, Volume +.
Top right corner display : battery charge icons, current
time.
Bottom display: ESC button, Menu, Recent
applications, Screenshot, Volume -, Volume +.
4. Equipment basic setting
Setting: Click setting icons
, enter setting interface
4.1 Wi-Fi
Drag “OFF” to “On”, it will show the available Wi-Fi
signal.Choose yours, then connect it by entering
password. You can browse website then.
Drag “OFF” to “On”, it will show the available Wi-Fi
signal.Choose yours, then connect it by entering
password. You can browse website then.
4.3 Sound: Volume, Default notification sound,
Touch sounds, Screen lock sound.
Touch sounds, Screen lock sound.
4.4 Display: Brightness, wallpaper, auto-rotate
screen, sleep, Daydream, front size, Cast screen ,
Sensors ,HDMI , output screen resize.
screen, sleep, Daydream, front size, Cast screen ,
Sensors ,HDMI , output screen resize.
4.5 Storage
Remove TF card, view the available storage space.
【Remark】: please touch option ” Unmount
Removable SD card”, so that you can remove SD
card safely.
Remove TF card, view the available storage space.
【Remark】: please touch option ” Unmount
Removable SD card”, so that you can remove SD
card safely.
4.6 Application Management
How to Install Android Applications:
How to Install Android Applications:
Purchased or free Android applications that you have
downloaded to your computer can be installed
quickly & easily on the unit by using the File Manager
application.
a. Copy the .apk files that you want to install onto a
downloaded to your computer can be installed
quickly & easily on the unit by using the File Manager
application.
a. Copy the .apk files that you want to install onto a
to reveal
SD card or USB device, then
insert or connect it to your Device.
insert or connect it to your Device.
Tap the File Manager application icon
this screen:
b. Tap or and locate the folder in which the .apk
application files were saved.
b. Tap or and locate the folder in which the .apk
application files were saved.
c. Tap on an .apk file to start to install. Tap NEXT to
continue the installation, and then see the
confirmation of install.
continue the installation, and then see the
confirmation of install.
Tap Open to launch the application now, or tap Done
to return to File Manager.
to return to File Manager.
Manage and uninstall Application
【Remark】:
Uninstall
1. enter “setting”>”Apps”>”ALL” And there will be all
the program list
2. Click the application you want to uninstall, will enter
the following interface
3. Click Uninstall, then you can delete the application.
Uninstall
1. enter “setting”>”Apps”>”ALL” And there will be all
the program list
2. Click the application you want to uninstall, will enter
the following interface
3. Click Uninstall, then you can delete the application.
4.7 Language & input
Select Language: multi languages are available
Android keyboard: Android keyboard setting.
Android keyboard: Android keyboard setting.
4.8 Backup & reset
Backup &RESTORE: Back up my data, Backup
account, Automatic restore, Factory data reset.
Personal Data: Erases all data on tablet.
Backup &RESTORE: Back up my data, Backup
account, Automatic restore, Factory data reset.
Personal Data: Erases all data on tablet.
4.9 Date & time
Select time zone and select date format, time format.
Select time zone and select date format, time format.