NINGBO BRILLIANT ELECTRONICS . LTD BRI810 Manuale Utente
Maximum load
@ -40°F ~ 158°F
(-40°C ~ 70°C)
Resistive/Tungsten - 600W@120V
Ballast Electronic (LED) - 800/1200VA@120/277V
Ballast Electronic (LED) - 800/1200VA@120/277V
Power supply
HF System
120-277VAC
5.8GHz CW
Dim control output
Detection radius/angle
Mounting height
Remote range
Humidity
Temperature
Detection radius/angle
Mounting height
Remote range
Humidity
Temperature
0-10V, max. 25mA sinking current
Max meters/360°
Max 20ft
33ft. (10m) indoor, no backlight
Max. 95% RH
-104°F ~ 158°F (-40°C ~ 70°C)
Max meters/360°
Max 20ft
33ft. (10m) indoor, no backlight
Max. 95% RH
-104°F ~ 158°F (-40°C ~ 70°C)
-2-
BRI810 instruction
Photoelectric And Microwave Motion Sensor Switches
BRI810 instruction
Photoelectric And Microwave Motion Sensor Switches
SPECIFICATIONS
SENSOR INFORMATION
Height of installation8~20ft
(Height of installation8ft)
Min:5ft
Max:25ft
8~20ft
Detection range
-1-
Min:5ft
Max:25ft
UTILIZING FIELD AND INTRODUCTION
BRI810 is a moving object sensor that can detect range of 360°and it’s working frequency is 5. 8GHz.
The advantage of this product is stable working state (stable working temperature: -15°C~+70°C), BRI810
adopts a microwave sensor(high-frequency output<0.2mW),so that it is safe and performs better than
infrared sensor.
The advantage of this product is stable working state (stable working temperature: -15°C~+70°C), BRI810
adopts a microwave sensor(high-frequency output<0.2mW),so that it is safe and performs better than
infrared sensor.
Detection angel
360
NOTE:
th
The high-frequency output of this sensor
is <0.2mW-that is just one 5000 of the transmission
oven.
power of a mobile phone or the output of a microwave
Transmission power<0.2mW
BRI810 wiring with non-dimming ballast or LED driver.
BRI810 wiring with dimming ballast or LED driver.
WIRING DIAGRAMS
Dimming Driver
Dimming
Driver
LINE(Black)
NEUTRAL(White)
GRAY (-)
VIOLET (+)
LOAD(Red)
NEUTRAL
(White)
Non-Dimming Driver
Non-Dimming
Driver
LINE(Black)
NEUTRAL(White)
LOAD(Red)
NEUTRAL
(White)
FUNCTION AND OPTIONS
If offers 4 levels of the light Control : dimming light(0,10%,20%, 30%)--100%--dimming light
(0,10%,20%,30%)--off periods of selectable waiting time:motion holdtime and 24hours,
selectable daylight threashold,and freedom of detection ara.
If natral light lower Light-control setting (10Lux,30Lux,50Lux),the light will not automatically
on (0,10%,20%,30%). When person enter in the room,the light will on 100%,after person left
the room,the room enter in semi bright brightness after hold on time.
(0,10%,20%,30%)--off periods of selectable waiting time:motion holdtime and 24hours,
selectable daylight threashold,and freedom of detection ara.
If natral light lower Light-control setting (10Lux,30Lux,50Lux),the light will not automatically
on (0,10%,20%,30%). When person enter in the room,the light will on 100%,after person left
the room,the room enter in semi bright brightness after hold on time.
Light switches off automatically
after the dimming time elapsed.
after the dimming time elapsed.
With suffcient natural light,
the light does not switch on
when presence detected.
With insufficient natural
the sensor switches on the light
automatically when person
enters the
automatically when person
enters the
room.
light,
(options) standby
level after the
The lamp
never switch off with presence,
even the nature light is sufficient.
even the nature light is sufficient.
People left, light still dims to
0/10%/20%/30% (options)
standby level after the hold
time.
0/10%/20%/30% (options)
standby level after the hold
time.
Close End Wire Connector