Hangzhou Jolog Robot Technology Co. LTD SRA07 Manuale Utente
7.General Error
7.1 Alarm and Prompt Facility
7.2 General Error
1. If the machine stops working, the display will show the error code.
2.Please check the display failure prompt, according to the following tips to clear the exception.
2.Please check the display failure prompt, according to the following tips to clear the exception.
Faults performance
Error Code
Solution
Remarks
Obstacles on the sensors
window.
Obstacles on the sensors
window.
window.
E1
E2
Clean the ground detection
sensor.
sensor.
Clean the Wall detection
sensor.
sensor.
Clean the ground detection
sensors regularly.
sensors regularly.
Clean the wall detection
sensors regularly.
sensors regularly.
Driving wheel off the ground
E3
E4
Place the machine on the
ground.
ground.
Keep the machine on the
ground.
ground.
1.Can not work
2.Cannot automatically charge.
2.Cannot automatically charge.
1.Driving wheel block.
2.Hair and a strip of cloth twine
in the wheels.
2.Hair and a strip of cloth twine
in the wheels.
2.Hair and a strip of cloth twine
in the Side brush.
in the Side brush.
Please check and clean the
debris on the driving wheel.
debris on the driving wheel.
Please check the hair and cloth
wrapped around the side brush.
wrapped around the side brush.
Clean the wheels regularly.
E5
E6
1.The Side brush while blocking.
Clean the Side brush
regularly.
regularly.
Charge the XSmart manually
.
Connect the battery cable
.
The battery is not connected.
E7
Battery replacement.
The battery is damaged.
E8
Check the mechanical induction
bar.
bar.
Mechanical induction bar are
stuck
.
E9
Please keep XSmart
charging after working
everytime.
charging after working
everytime.
No.
1
Faults
Solution
Walk back all the time
2
3
4
XSmart does not work
Unable to auto-recharge
Unable to recharge
Product website: xshuairobot.com
- 18 -
1. It is better to avoid robot working in the strong bright environment.
2. It is better to avoid robot working in the black carpet.
3. Check the ground sensors to see if any dust or dirt covered the sensor
window.
1. Check whether the power switch is on.
2. Check whether XSmart is enough power, if not, please charge the XSmart.
1. Check whether the LED indicator of docking station is on.
2. Check whether there are obstacles between XSmart and recharging station.
3. When the battery power is low, please charge XSmart artificially.
1. Check if the battery is installed correctly. If yes,please turn on the power
switch to see if the display is on.
2.If the appearance of the battery is deformed, damaged and so on, please
stop using XSmart and call our customer servicer.
stop using XSmart and call our customer servicer.