Technolabs LLC 504953 Manuale Utente
INSTALLATION OF STARTER KIT
3. Plug the Head, Landing Gear and Camera to
body. Push firmly in place.
4. To remove head rotate 90° and pull out.
5. Plug installed Propeller Guard/Propellers to the
5. Plug installed Propeller Guard/Propellers to the
Drone arm. Plug into Body. Push firmly in place.
6. If Dronoid does not fly properly recheck all
attachments and make sure propellers are
connected properly.
connected properly.
Control Directions
1. Press 2 Buttons for emergency stop.
All propellers will shut down
2. Power On/Off Button
3. Headless Function Button
4. Direction control stick
5. Photo Button
6. Video Button
7. Lean right Trimming
8. Backward trimming
3. Headless Function Button
4. Direction control stick
5. Photo Button
6. Video Button
7. Lean right Trimming
8. Backward trimming
9. Right Turn trimming
10.Left turn trimming
11. Accelerator
12. Speed control
13. One key return (long press)
14. Lean Left trimming
15. Forward trimming
10.Left turn trimming
11. Accelerator
12. Speed control
13. One key return (long press)
14. Lean Left trimming
15. Forward trimming
1. Press the Power On/Off button to turn on the controller,
Power Indicator will light up (Indication will flashing
when controller battery is low) . when Pairing, 3 MODE
LED light will flashing. And one of MODE LED will stay
light up when pairing successfully. When received a
single will have a beep sound). After pairing
successfully, you can control your DRONE, TANK or
ROVER now.
when controller battery is low) . when Pairing, 3 MODE
LED light will flashing. And one of MODE LED will stay
light up when pairing successfully. When received a
single will have a beep sound). After pairing
successfully, you can control your DRONE, TANK or
ROVER now.
2. ONE KEY RETURN : When the drone is flying, press this
ONE KEY Return, the drone will fly back to where it
started.
started.
3. left / right rotation trim
As the Drone lifts off, if the drone rotation right, adjust
the left trim rotation. If the drone rotation left, adjust
the right trim rotation
the left trim rotation. If the drone rotation left, adjust
the right trim rotation
4. Forward/backward rotation trim
As the drone lifts off, if the drone moves forward,
adjust the backward trim rotation, if the drone rotation
move backward, adjust the forward trim rotation.
adjust the backward trim rotation, if the drone rotation
move backward, adjust the forward trim rotation.
5. Lean left / right trim
As the drone lifts off, if the drone rotates right, adjust
the left trim rotation. If the drone rotates left, adjust the
right trim rotation.
the left trim rotation. If the drone rotates left, adjust the
right trim rotation.
6. When the camera module is installed, press “take
photo” button to take photo. Photos store on Micro SD
1. Attach 4 propeller guards
to arms. Secure by screw,
do not overtighten.
do not overtighten.
2. Install propellers.
ATTENTION - Note diagram
for installation of 2A and
2B. Propellers are marked
A or B. A1/A2/A3/A4 are
same; B1/B2/B3/B4 are
same. Secure by screw.
Do not overtighten.
for installation of 2A and
2B. Propellers are marked
A or B. A1/A2/A3/A4 are
same; B1/B2/B3/B4 are
same. Secure by screw.
Do not overtighten.
1
2
3
12
13
14
15
4
11
4
12
5
10
6
7
8
9
7. When the camera module is installed, press “take
video” button to take video. Video stores on Micro SD
card, press “take video” button again to stop
recording.
card, press “take video” button again to stop
recording.
8. Three different speed modes – slow/middle/high
speed (works together with Accelerator)
9. Headless function : This button sets direction
according to the direction of the remote control
10. Direction control stick –
Controlling drone – forward,backward, lean left and
lean right.
Controlling Tank & Rover - forward / Backward , turn
left and turn right.
lean right.
Controlling Tank & Rover - forward / Backward , turn
left and turn right.
11.Joy stick forward/backward, controls accelerator.
Left and right controls right and left turn.
12.Pairing – LED is flashing when pairing. After
connection, LED will stay on.
13.Speed control button + headless button - emergency
stop (when in Drone mode)
!
Do not mix old and new batteries.
Do not mix alkaline, standard (carbon-zinc)
or rechargeable(nickel-cadmium)batteries.
Do not mix alkaline, standard (carbon-zinc)
or rechargeable(nickel-cadmium)batteries.
INSTALLATION OF ROVER KIT
Transform Drone to ROVER
1. Remove the arms and legs of the Dronoid from the body
2. Attach Rover wheels to the body (as shown)
Control ROVER
1. Remove the arms and legs of the Dronoid from the body
2. Attach Rover wheels to the body (as shown)
Control ROVER
Control the Rover by using the Direction control stick (4).
Set at three different speeds by Speed Control (12).
Set at three different speeds by Speed Control (12).
4
12
INSTALLATION OF TANK KIT
FOR WIFI CAMERA
Transform Drone to TANK
1. Remove the arms and legs of the Dronoid from the body
2. Attach Tank treads to the body (as shown)
Control TANK
1. Remove the arms and legs of the Dronoid from the body
2. Attach Tank treads to the body (as shown)
Control TANK
Control the Tank by using the Direction control stick (4).
Set at three different speeds by Speed Control (12).
Set at three different speeds by Speed Control (12).
For Android mobile, please scan
QR code from mobile and
download the APP.
download the APP.
For iPhone, please download
JH WIFI from Apple Store.
APP will appear as JH WIFI in
mobile device.
JH WIFI from Apple Store.
APP will appear as JH WIFI in
mobile device.
PLUG the camera module as picture show :
Turn on the Drone, the LED on camera will flash for pairing.
When connected and
paired you can view
images from Dronoid
using the APP on your
mobile device.
Clip can hold mobile
phone to view while
operating.
paired you can view
images from Dronoid
using the APP on your
mobile device.
Clip can hold mobile
phone to view while
operating.
TechnoLabs
524 Broadway
7th floor
New York, NY 10012
524 Broadway
7th floor
New York, NY 10012
CAUTION:
Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired
operation.
two conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired
operation.
When playing the Drone with WIFI camera, please make sure there is at least 20cm distance from the user