Bosch Security Systems BV NDE8000 Manuale Utente

Pagina di 42
26
en | Hardware Installation
FLEXIDOME IP starlight 8000i
2018.11 | 01 |
Installation Manual
Bosch Security Systems
Steps
1.
Open the sachet and take out the pill. From now you have 10 minutes to complete the
whole installation.
2.
Remove the protective cover from the adhesive side of the pill.
3.
Affix the pill to the base, on the left side of the cable inlets. Be sure not to cover the
ventilation hole.
4.
Proceed with the installation of the camera top immediately.
Installing the camera top
The camera top connects to the base through a built-in plug/socket connector. To achieve this
connection, camera top and base have to be aligned properly.
To facilitate proper alignment, top and base are marked with a triangle on their inside. Align
these triangles before mounting the top.
Preliminaries
Screwing tool with TR20 bit installed.
Steps
1.
Align camera top to camera base.
2.
Put the camera top onto the base, with no gap between top and base. This has to fit
easily. Do not use physical force if it doesn’t fit! Check for proper alignment instead!
3.
While holding the camera top with one hand, use the other hand to hand-tighten two
opposing bolts.