GuangZhou SunFieldAimo Electronic Technology Co. Ltd CG-3015 Manuale Utente
Safe Operation
© 2016 Cine Gears INC. All Rights Reserved.
2
Do not exceed the 8 kg payload in cable mode, and 10 kg payload in trolley mode (including Pegasus
and battery).
and battery).
Do not exceed the 35° grade limit in cable cam mode, and the 10° grade limit in trolley mode.
Do not set up the cable system on weak or unstable anchors; any sagging of the cable or movement
of the anchors will greatly affect the functionality of the cable system, and potentially threaten the
well-being of the equipment and crew.
of the anchors will greatly affect the functionality of the cable system, and potentially threaten the
well-being of the equipment and crew.
The Pegasus is equipped with rubber stoppers on either end of the housing for impact-absorption.
On either side of the housing are monitors that will automatically stop motion when obstructions are
detected, effectively preventing unwanted collisions between your Pegasus and its surroundings.
In the options menu there is a Voltage monitor so you can actively observe voltage and amperage levels.
detected, effectively preventing unwanted collisions between your Pegasus and its surroundings.
In the options menu there is a Voltage monitor so you can actively observe voltage and amperage levels.
The stability arms are highly recommended for ground use, to ensure stability, and to prevent toppling
with heavy cameras that have a high center of gravity.
with heavy cameras that have a high center of gravity.
The stability arms should be in place before calibrating a Gimbal, as the calibrating motions of the
Gimbal may otherwise topple the Pegasus and cause damages to the Gimbal or Pegasus housing.
Gimbal may otherwise topple the Pegasus and cause damages to the Gimbal or Pegasus housing.
Use the safety locks every time the mounting plate is utilized.
The pulley system is highly recommended for double cable use, as it maintains an optimal space for the
cable cam to travel along the two parallel wires: never let your cables cross each other.
cable cam to travel along the two parallel wires: never let your cables cross each other.
Every time the trolley cam system is utilized, both the small and large sets of rubber wheel mounts must
be placed onto the wheels.
be placed onto the wheels.
In trolley mode, it is important that the stability arms be in place before calibrating a Gimbal, as the
calibrating motions of the Gimbal may otherwise topple the Pegasus and cause damages to the Gimbal
or Pegasus housing.
calibrating motions of the Gimbal may otherwise topple the Pegasus and cause damages to the Gimbal
or Pegasus housing.
The side of the housing where the battery sits is the forward direction of the Pegasus, as denoted by the
+ values.
+ values.
Warranty does not cover: overheating, over usage, damage to the motor, or any damage that occurs through
user neglect. The warranty may also be voided if the user attempts to modify and repair the system
independently: please contact our technical assistants before any repairs are attempted.
user neglect. The warranty may also be voided if the user attempts to modify and repair the system
independently: please contact our technical assistants before any repairs are attempted.
When the green indication light (on the side of the body) is on, it means the battery is low; when the green
light is flashing, it means there is troubles with the unit, indicating either: there is an obstacle 60 cm's ahead
of the Pegasus, or the motor is dead, or the Pegasus body is overheating. When this occurs, stop
procedures immediately.
light is flashing, it means there is troubles with the unit, indicating either: there is an obstacle 60 cm's ahead
of the Pegasus, or the motor is dead, or the Pegasus body is overheating. When this occurs, stop
procedures immediately.
When the yellow indication light (on the side of the body) blinks periodically, it is to indicate every time a
picture or video is captured. When the yellow light is flashing, it is to indicate that the collision protection
is engaged.
picture or video is captured. When the yellow light is flashing, it is to indicate that the collision protection
is engaged.