GuangZhou SunFieldAimo Electronic Technology Co. Ltd XYAM Manuale Utente

Setting Controller Modes

5

Press and hold (REC) + (A) to switch to M-Normal mode. In

M-Normal mode, user can set vibration points, and move controller beyond set

lock points.

Press and hold (REC) + (B) to switch to M-Lock mode. In M-Lock mode, user 

cannot move past set lock points.

Press and hold (REC) + (C) to switch to M-Zoom mode. In M-Zoom

mode, user cannot move past set lock points. In M-Zoom, controller moves more

slowly between lock points for finer control.

Specifically used with infinity lenses that have no start or end point. Press  

(SET) + (B) for 3 seconds until you see the (A), (B), (C), (D) lights go on. Then use 

(C) or (D) button to control the lens. (Hold down the C or D key for more 

than 3 seconds to rotate continuously.) Once it rotates to the proper 

position, click the (A) button to set a starting point, (B) button to set the end point. 

After points are set, the (A), (B), (C), and (D) lights turn off to indicate the initialization 

has been completed.