Jie Du Electronics Technology Co. LTD 39154-T Manuale Utente
BATTERY INSTALLATION IN LIGHT: To open, turn back cover
of puck light counterclockwise and remove. Insert 3 AA batteries
(noting polarity). To close, replace cover and turn clockwise.
REMOTE: To replace exhausted battery, open the battery
REMOTE: To replace exhausted battery, open the battery
compartment on the back of the remote. Insert 1 A23 battery.
(noting polarity) Replace cover.
©2017 Energizer. Energizer and certain graphic designs are trademarks
of Energizer Brands, LLC and related subsidiaries and are used under license by Jasco Products
Company, LLC. All other brand names are trademarks of their respective owners. Neither Jasco
Products Company, LLC nor Energizer Brands, LLC is affiliated with the respective owners of
their trademarks.
Questions? Contact us at 1-800-654-8483 between 7:00AM-8:00PM CST.
90-day warranty. Visit www.byjasco.com for warranty details.
of Energizer Brands, LLC and related subsidiaries and are used under license by Jasco Products
Company, LLC. All other brand names are trademarks of their respective owners. Neither Jasco
Products Company, LLC nor Energizer Brands, LLC is affiliated with the respective owners of
their trademarks.
Questions? Contact us at 1-800-654-8483 between 7:00AM-8:00PM CST.
90-day warranty. Visit www.byjasco.com for warranty details.
MADE IN CHINA/HECHO EN CHINA
Wireless color-changing puck lights
REMOTE OPERATION:
1. Press the ON button to turn on the lights. The default setting
is white.
2. Pressing the “Auto” button will slowly transition through the
spectrum of colors.
3. Press the “White” button to switch the lights back to white.
4. Use the “+” and “-” buttons to brighten or dim the lights.
5. The “R,” “G” and “B” buttons stand for red, green and blue.
These buttons allow you to either select one of these colors or
blend them to select the desired color. Hold the “R,” “G” or “B”
button for three seconds to go directly to that color or press and
release the button to move through the spectrum one color
at a time.
6. The “Set” button allows you to quickly return to your favorite color.
Once the desired color is found, hold the “Set” button until it
flashes. The color will now be easily selectable by pressing
the “Set” button.
7. The “15”, “30”, “45” and “60” buttons will automatically turn the
lights off after the number of minutes indicated on the button.
MANUAL OPERATION:
1. Press the lens of the puck light to turn on the light. The only color
option in manual operation is white.
2. Press the lens again to turn the light off.
MOUNTING INSTRUCTIONS:
MOUNTING INSTRUCTIONS:
•
Use included screws or double-sided tape to mount battery door
where you want it.
•
To install using screws, open cover and screw through holes in
battery door. Do not overtighten.
•
To close, attach light to mounted cover, turning it clockwsie
to close.
NOTE: Battery door may remain mounted when changing batteries.
NOTE: Battery door may remain mounted when changing batteries.
Functional range may be adversely affected by one or more of
the following factors: weather, radio frequency interference, low
transmitter battery or obstructions between the transmitter and
receiver.
•
BATTERIES MAY LEAK HARMFUL
LIQUIDS OR IGNITABLE MATERIALS
OR EXPLODE CAUSING INJURY AND
PRODUCT DAMAGE
LIQUIDS OR IGNITABLE MATERIALS
OR EXPLODE CAUSING INJURY AND
PRODUCT DAMAGE
•
DO NOT MIX OLD AND NEW OR OTHER
BATTERY TYPES
BATTERY TYPES
•
REPLACE ALL BATTERIES AT THE
SAME TIME
SAME TIME
•
REMOVE BATTERIES IF PRODUCT
IS TO BE UNUSED FOR EXTENDED
PERIODS OF TIME
IS TO BE UNUSED FOR EXTENDED
PERIODS OF TIME
WARNING
FCC NOTE: The manufacturer is not responsible for any radio or TV interference
caused by unauthorized modifications to this equipment. Such modifications
could void the user’s authority to operate the equipment.
FCC STATEMENT: This device complies with Part 15 of the FCC rules.
Operation is subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation. This
device must not be co-located or operating in conjunction with any other
antenna or transmitter. This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
To comply with FCC's RF radiation exposure limits for general population/
uncontrolled exposure, this device must be installed to provide a separation
distance of at least 20cm from all persons.
WARNING: Changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user's authority to operate
the equipment.
RF
ON
OFF
AUTO
WHITE
SET
15
30
45
60
+
-
R
G
B
3
1
2
4
6
5
7