Shenzhen HC Tech Co. Ltd. 2017JVCI Manuale Utente
122
13
VCI Manager
This application pairs the tablet with the OtoFlash, checks the communication
status and update the VCI software.
status and update the VCI software.
Figure 13-1 Sample VCI Manager Screen
1. Connection Mode
– there are three connection modes available for
selection. The connection state is displayed alongside.
BT Paring
– when paired to a wireless device, the connection state
displays as Paired; otherwise it displays as Unpaired.
Update (for VCI software only)
– when the OtoSys tablet and the
OtoFlash are connected by a USB cable, this function is used to
update VCI software via Internet.
update VCI software via Internet.
Programmer update - updates UP400 firmware via Internet.
2. BT Setting
The BT Setting screen displays the types and product serial numbers for
all the devices available for pairing. Tap a required device to start pairing.
The BT status icon displayed to the left of the device name indicates the
received signal strength.
all the devices available for pairing. Tap a required device to start pairing.
The BT status icon displayed to the left of the device name indicates the
received signal strength.