Shenzhen HC Tech Co. Ltd. OTOSYSIM600 Manuale Utente
30
Figure 4-3 Sample Enter VIN Screen
4. Tap the input box and enter the correct VIN.
5. Tap Done to complete or tap Cancel to exit Manual Input.
Automatic Selection
The Auto VIN Scan can be selected after selecting the test vehicle
manufacturer.
To perform Automatic Selection
1. Tap the Diagnostic application button from the OtoSys Job Menu.
The Vehicle Menu displays.
2. Tap the manufacturer button of the test vehicle.
3. Tap Automatic Selection and the VIN information will be
automatically acquired. Follow the on-screen instruction to display
the function screen.
the function screen.
Manual Selection
When the vehicle
’s VIN is not automatically retrievable through the vehicle's
ECU, or the specific VIN is unknown, the vehicle can be manually selected.
This mode of vehicle selection is menu driven, repeat the first two steps from
the automatic selection operation and tap Manual Selection. Through a
series of on-screen prompts and selections, the test vehicle is chosen. If
needed, press the Back button at the bottom right corner of the screen to
return to the previous screen.
the automatic selection operation and tap Manual Selection. Through a
series of on-screen prompts and selections, the test vehicle is chosen. If
needed, press the Back button at the bottom right corner of the screen to
return to the previous screen.
Navigation
Navigating the IMMO interface and selecting test are discussed in this section.